2W Filterless Mono Class-D Audio Amplifier
www.DataSheet4U.com
LX1701
TM ®
2W Filterless Mono Class-D Audio Amplifier
P RODUCTION D ATA S HEET
DESCRIPTION KEY F...
Description
www.DataSheet4U.com
LX1701
TM ®
2W Filterless Mono Class-D Audio Amplifier
P RODUCTION D ATA S HEET
DESCRIPTION KEY FEATURES No Output Filter Required Low EMI Design Low Quiescent Current: 2mA Low Shutdown Current:1µA Low And Wide Supply Voltage Range: 1.8-6.0 Volt 2W Output Power Into 4Ω Load With THD<1% 3W Into 2Ω With THD<1% THD+N As Low As 0.09% Small Form Factor: 16-pin MLPQ Package: 4mmx4mm -40 to +85°C Operating Range Only 1 External Component Needed, No Input AC Coupling Capacitor Required, Under Certain Conditions Built-in Clock Frequency 200KHz Built-in Feedback Loop, Allows High Audio Fidelity 14dB/8dB Gain Selectable 20/300Hz Bandwidth Selectable Shut-down Function Internal Thermal Shut-down High Efficiency: 85% Through Modulation Scheme And Class-D Operation Built-in De-pop Circuit, No Turn ON/OFF “POP” Noise
The LX1701 family represents a new generation of a fully integrated audio mono class-D amplifier from Microsemi. This CMOS monolithic class-D amplifier series is optimized for low voltage, low power operation and minimum system cost. The products are ideal for use in battery powered applications where low power consumption is desirable such as cell phones, PDA’s, web tablets and other low power systems.
The LX1701 family provides very low quiescent current consumption through the use of a proprietary output modulation scheme. This technology enables filter-less operation in many applications. The part features on board, low Rdson, co...
Similar Datasheet