LEDRA80X80

www.DataSheet4U.com ® Model LEDRA80X80 Red Area Light Area Light Features Lightly diffused, strobed, area light for PresencePLUS™ sensors. See Banner’s website at www.bannerengineering.com for a complete lighting tutorial. Solid-state visible red LEDs Direct connection to PresencePLUS sensors, using 3-pin Pico-style connector (Do not connect to any other power source) Two available bracket options Area Light Specifications Light source Illumination Supply voltage and current Connections Construction Useful Life Operating conditions Cleaning instructions Visible red LED, 660 nm Lightly diffused, high-intensity area light. At a 12" distance the light illuminates a 4" diameter area that is within 50% of the center intensity. Voltage supplied by P1B65Q, P2B65Q or select PresencePLUS sensors only (do not connect to any other power source). Current: 300 mA max. 2 m (6.5') pigtail with 3-wire, 8 mm female Pico-style connector. Connect to select PresencePLUS sensors only. Low-carbon steel with black zinc plating, acrylic window 10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30% after 10,000 hours and less than 40% after 20,000 hours. Temperature: 0° to +50°C (+32° to 122°F) Relative humidity: 90% at 50°C (non-condensing) max. Regularly remove any dust, dirt, or fingerprints from the light source. 1. Blow off dust using anti-static compressed air. 2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe o...