www.DataSheet4U.com
Global Mixed-mode Technology Inc.
Two Remote Temperature Sensors and One Fan Controller with SMBus...
www.DataSheet4U.com
Global Mixed-mode Technology Inc.
Two Remote Temperature Sensors and One Fan Controller with SMBus Serial Interface and System Reset Circuit
Features
Measures Two Remote Temperatures No Calibration Required SMBus 2-Wire Serial Interface Programmable Under/Over-temperature Alarms Programmable Thermal Shutdown Signal Supports SMBus Alert Response Accuracy: ±5°C (-40°C to + 125°C, remote) ±3°C (+60°C to + 100°C, remote) +4.5V to +5.5V Supply Range Fan speed control range: 3,000 to 30,000 rpm Fan speed accuracy: ±2% Built-in MOSFET switch Internal current-limit and over-temperature protection for fan control Watchdog for fan control Alarm for fan failure Precision Monitoring of 5V Power-Supply Voltage 340ms Typical Power-On Reset Pulse Width RESET Output Guaranteed RESET Valid to VCC=1V Power Supply Transient Immunity No External Components needed for reset function Small, 16-Pin SSOP Package
G768D
General Description
The G768D contains a precise digital thermometer, a fan controller, and a system-reset circuit. Except for one less fan controller, G768D is backward compatible with G768B. G768D has 2 more functions, fan-failure detection and programmable thermal shutdown signal. The thermometer reports the temperature of 2 remote sensors. The remote sensors are diode-connected
transistors typically a low-cost, easily mounted 2N3904
NPN type that replace conventional thermistors or thermocouples. Re...