Ethernet Transceiver
www.DataSheet4U.com
VITESSE
SEMICONDUCTOR CORPORATION
Data Sheet
VSC7135
Features
• Gigabit Ethernet Transceiver @ 1....
Description
www.DataSheet4U.com
VITESSE
SEMICONDUCTOR CORPORATION
Data Sheet
VSC7135
Features
Gigabit Ethernet Transceiver @ 1.25Gb/s Compliant to IEEE 802.3Z PMA TTL Interface Compatible to PMA-TBI Monolithic Clock Synthesis and Clock Recovery - No External Components 125MHz TTL Reference Clock
1.25Gbits/sec Gigabit Ethernet Transceiver
Low Power Operation - 700 mW Suitable for Both Coaxial or Optical Link Applications 64 Pin, 14mm or 10mm Standard PQFP Single +3.3V Supply
General Description
The VSC7135 is a 1.25Gb/s Ethernet Transceiver optimized for Gigabit Ethernet or 1000Base-X applications. It accepts 10-bit 8B/10B encoded transmit data, latches it on the rising edge of REFCLK and serializes it onto the TX PECL differential outputs at a baud rate which is ten times the REFCLK frequency. The VSC7135 also samples serial receive data on the RX PECL differential inputs, recovers the clock and data, deserializes it onto the 10-bit receive data bus, outputs two recovered clocks at one-twentieth of the incoming baud rate and detects “Comma” characters. The VSC7135 contains on-chip PLL circuitry for synthesis of the baud-rate transmit clock, and extraction of the clock from the received serial stream. These circuits are fully monolithic and require no external components.
VSC7135 Block Diagram
EWRAP R0:9
10
QD
Serial to Parallel ÷ 10
Retimed Data Recovered Clock
QD Clock Recovery 2:1
RX+ RX-
RCLK RCLKN
Frame Logic ÷ 20 Comma Detect
Resync
COM_DET EN_CDET
1...
Similar Datasheet