Document
www.DataSheet4U.com
S71GL064A Based MCPs
Stacked Multi-Chip Product (MCP) Flash Memory and RAM 64 Megabit (4 M x 16-bit) CMOS 3.0 Volt-only Page Mode Flash Memory and 16/8 Megabit (1M/512K x 16-bit) Pseudo Static RAM / Static RAM
ADVANCE INFORMATION
Notice to Readers: The Advance Information status indicates that this document contains information on one or more products under development at Spansion LLC. The information is intended to help you evaluate this product. Do not design in this product without contacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed product without notice.
Publication Number S71GL064A_00
Revision A
Amendment 2
Issue Date February 8, 2005
This page intentionally left blank.
S71GL064A based MCPs
Stacked Multi-Chip Product (MCP) Flash Memory and RAM 64 Megabit (4 M x 16-bit) CMOS 3.0 Volt-only Page Mode Flash Memory and 16/8 Megabit (1M/512K x 16-bit) Pseudo Static RAM / Static RAM
Data Sheet
ADVANCE INFORMATION
Distinctive Characteristics
MCP Features
Power supply voltage of 2.7 to 3.1 volt High performance
— 100 ns access time (100 ns Flash, 70 ns pSRAM/ SRAM) — 25 ns page read times
Packages
— 7 x 9 x 1.2 mm 56 ball FBGA (TLC056)
Operating Temperature
— –25°C to +85°C — –40°C to +85°C
General Description
The S71GL064A product series consists of S29GL064 Flash memory with pSRAM and SRAM combinations defined as: Flash Memory Density 64Mb pSRAM / SRAM Density 8Mb 16Mb S71GL064A80/S71GL064A08 S71GL064AA0/S71GL064A0A
Publication Number S71GL064A_00
Revision A
Amendment 2
Issue Date February 8, 2005
This document states the current technical specifications regarding the Spansion product(s) described herein. Each product described herein may be designated as Advance Information, Preliminary, or Full Production. See the section “Notice on Data Sheet Designations” for definitions.
A d v a n c e
I n f o r m a t i o n
Notice On Data Sheet Designations
Spansion LLC issues data sheets with Advance Information or Preliminary designations to advise readers of product information or intended specifications throughout the product life cycle, including development, qualification, initial production, and full production. In all cases, however, readers are encouraged to verify that they have the latest information before finalizing their design. The following descriptions of Spansion data sheet designations are presented here to highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion LLC is developing one or more specific products, but has not committed any design to production. Information presented in a document with this designation is likely to change, and in some cases, development on the product may discontinue. Spansion LLC therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion LLC. T.