S25FL001D

www.DataSheet4U.com S25FL Family (Serial Peripheral Interface) S25FL002D, S25FL001D 2 Megabit, 1 Megabit CMOS 3.0 Volt Flash Memory with 25 MHz SPI Bus Interface PRELIMINARY INFORMATION Distinctive Characteristics ARCHITECTURAL ADVANTAGES „ Single power supply operation — Full voltage range: 2.7 to 3.6 V read and program operations Memory Architecture — 2 Mb – Four sectors with 512 Kb each — 1 Mb – Four sectors with 256 Kb each Program — Page Program (up to 256 bytes) in 6 ms (typical) — Program cycles are on a page by page basis Erase — 0.25 s typical sector erase time (S25FL001D) — 0.5 s typical sector erase time (S25FL002D) — 1.0 s typical bulk erase time (S25FL001D) — 2.0 s typical bulk erase time (S25FL002D) Endurance — 100,000 cycles per sector typical Data Retention — 20 years typical Device ID — Electronic signature Process Technology — Manufactured on 0.25 µm process technology „ Package Option — Industry Standard Pinouts — 150 mil 8-pin SO package for 1Mb and 2Mb — 208 mil 8-pin SO package for 2Mb only — 8-contact WSON leadless package (6x5 mm) „ PERFORMANCE CHARACTERISTICS „ „ Speed — 25 MHz clock rate (maximum) Power Saving Standby Mode — Standby Mode 1 µA (typical) „ „ Memory Protection Features „ Memory Protection — W# pin works in conjunction with Status Register Bits to protect specified memory areas — Status Register Block Protection bits (BP1, BP0) in status register configure parts of memory as readonly „ „ „ „ SOFTWARE FEATURES „ SPI Bus Compatibl...