Transmit Circuit
www.DataSheet4U.com
Obsolescence Notice
This product is obsolete. This information is available for your convenience o...
Description
www.DataSheet4U.com
Obsolescence Notice
This product is obsolete. This information is available for your convenience only. For more information on Zarlink’s obsolete products and replacement product lists, please visit
http://products.zarlink.com/obsolete_products/
MGCT02
Transmit Circuit for TDMA/AMPS
Features
Dual RF Ports for 900MHz and 1900MHz AGC Amplifier with 90dB of Variable Gain, Fully Compensated for Temperature On-chip Active Filter. Removes the Requirement for External IF SAW Filter High Power 900MHz and 1900MHz Output Stages Quadrature Modulator
DS5241
ISSUE 3.0
December 2000
Ordering Information MGCT02/KG/QP1S MGCT02/KG/QP1T
Applications
Transmit Modulator and Up-converter in TDMA/ AMPS Mobile Phones
The MGCT02 circuit is designed for use in dual band, dual mode cellular 900MHz/PCS1900MHz mobile phones. It can be used for TDMA/AMPS. The MGCT02 is compatible with baseband and mixed signal interface circuits from Zarlink Semiconductor and other manufacturers. System costs have been kept to a minimum by removing the requirement for an additional SAW filter in the transmit IF path. The AGC has been split between RF and IF sections to reduce noise and a low pass filter has been included before the IF variable gain amplifier to remove spurious products produced in the modulator. For CDMA systems the MGCT04 is recommended.
Absolute Maximum Ratings
Supply voltage (VCC) 4V Control input voltage -0.6V to VCC + 0.6V -55˚C to +125˚C Storage temperature, T...
Similar Datasheet