Burst Mode Flash Memory
www.DataSheet4U.com
PRELIMINARY
Am29BDS643D
64 Megabit (4 M x 16-Bit) CMOS 1.8 Volt-only Simultaneous Read/Write, Burs...
Description
www.DataSheet4U.com
PRELIMINARY
Am29BDS643D
64 Megabit (4 M x 16-Bit) CMOS 1.8 Volt-only Simultaneous Read/Write, Burst Mode Flash Memory
DISTINCTIVE CHARACTERISTICS
s Single 1.8 volt read, program and erase (1.7 to 1.9 volt) s Multiplexed Data and Address for reduced I/O count — A0–A15 multiplexed as D0–D15 — Addresses are latched with AVD# control inputs while CE# low s Simultaneous Read/Write operation — Data can be continuously read from one bank while executing erase/program functions in other bank — Zero latency between read and write operations s Read access times at 54 MHz/40 MHz — Burst access times of 13.5/20 ns @ 30 pF at industrial temperature range — Asynchronous random access times of 90/90 ns @ 30 pF — Synchronous random access times of 106/120 ns @ 30 pF s Burst length — Continuous linear burst s Power dissipation (typical values, 8 bits switching, CL = 30 pF) — Burst Mode Read: 25 mA — Simultaneous Operation: 40 mA — Program/Erase: 15 mA — Standby mode: 0.2 µA s Sector Architecture — Eight 4 Kword sectors and one hundred twenty-seven 32 Kword sectors — Bank A contains the eight 4 Kword sectors and thirty-one 32 Kword sectors — Bank B contains ninety-six 32 Kword sectors s Sector Protection — Software command sector locking — WP# protects the last two boot sectors — All sectors locked when VPP = VIL s Handshaking feature — Provides host system with minimum possible latency by monitoring RDY s Software command set compatible with JEDEC 42.4 standards — Backwa...
Similar Datasheet