Bidirectional precision high-side current monitor
www.DataSheet4U.com
ZXCT1041 Bidirectional precision high-side current monitor
Description
The ZXCT1041 is a bidirectio...
Description
www.DataSheet4U.com
ZXCT1041 Bidirectional precision high-side current monitor
Description
The ZXCT1041 is a bidirectional precision highside current sense monitor. The output voltage is proportional to the differential input voltage. Direction of current flow is indicated by the Flag pin. The ZXCT1041 provides a fixed gain of 10 for applications where minimal sense voltage is required. The very low offset voltage enables a typical accuracy of 2% for sense voltages of only 10mV, giving better tolerances for small sense resistors necessary at higher currents. The wide input voltage range of 18V down to as low as 2.7V make it suitable for a range of applications. A minimum operating current of just 40A, combined with a SOT23-5 package makes this part suitable for portable battery equipment.
Features
Bidirectional high side measurement Output voltage scaling x10 2.7V to 20V high side voltage 35µA quiescent current 1% typical accuracy SOT23-5 package
Applications
Battery management Over current monitor Battery gas gauging Motor control
Typical application circuit
VIN+ RSENSE VIN-
Pin connections
4
5
Flag GND VOUT
VSENSE-
VSENSE+ VSENSEZXCT1041 GND VOUT
3 1
Flag
VSENSE+
2
VOUT
Ordering information
Order code ZXCT1041E5TA Package SOT23-5 Partmark 1041 Reel size (inches) 7 Tape width (mm) 8 Quantity per reel 3000
Issue 1 - November 2006
© Zetex Semiconductors plc 2006
1
www.zetex.com
ZXCT1041
Absolute maximum ratings
Voltage on VSENSE- and VSE...
Similar Datasheet