Low-power 3-input OR gate
16. Legal information
16.1 Data sheet status
Objective [short] data sheet Development
Preliminary [short] data sheet Qualiﬁcation
Product [short] data sheet
This document contains data from the objective speciﬁcation for product development.
This document contains data from the preliminary speciﬁcation.
This document contains the product speciﬁcation.
 Please consult the most recently issued document before initiating or completing a design.
 The term ‘short data sheet’ is explained in section “Deﬁnitions”.
 The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modiﬁcations or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
ofﬁce. In case of any inconsistency or conﬂict with the short data sheet, the
full data sheet shall prevail.
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation speciﬁcations and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a NXP Semiconductors product can reasonably be expected to
result in personal injury, death or severe property or environmental damage.
NXP Semiconductors accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or applications and therefore
such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
speciﬁed use without further testing or modiﬁcation.
Limiting values — Stress above one or more limiting values (as deﬁned in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/proﬁle/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conﬂict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
17. Contact information
For additional information, please visit: http://www.nxp.com
For sales ofﬁce addresses, send an email to: firstname.lastname@example.org
Product data sheet
Rev. 01 — 13 November 2006
© NXP B.V. 2006. All rights reserved.
15 of 16