Document
UJA1065
High-speed CAN/LIN fail-safe system basis chip
Rev. 07 — 25 February 2010
Product data sheet
1. General description
The UJA1065 fail-safe System Basis Chip (SBC) replaces basic discrete components that are common in every Electronic Control Unit (ECU) with a Controller Area Network (CAN) and a Local Interconnect Network (LIN) interface. The fail-safe SBC supports all networking applications that control various power and sensor peripherals by using high-speed CAN as the main network interface and LIN as a local sub-bus. The fail-safe SBC contains the following integrated devices:
• High-speed CAN transceiver, interoperable and downward compatible with CAN
transceivers TJA1041 and TJA1041A, and compatible with the ISO 11898-2 standard and the ISO 11898-5 standard (in preparation)
• LIN transceiver compliant with LIN 2.0 and SAE J2602, and compatible with LIN 1.3 • Advanced independent watchdog • Dedicated voltage regulators for microcontroller and CAN transceiver • Serial peripheral interface (full duplex) • Local wake-up input port • Inhibit/limp-home output port
In addition to the advantages of integrating these common ECU functions in a single package, the fail-safe SBC offers an intelligent combination of system-specific functions such as:
• Advanced low-power concept • Safe and controlled system start-up behavior • Advanced fail-safe system behavior that prevents any conceivable deadlock • Detailed status reporting on system and subsystem levels
The UJA1065 is designed to be used in combination with a microcontroller that incorporates a CAN controller. The fail-safe SBC ensures that the microcontroller is always started up in a defined manner. In failure situations, the fail-safe SBC will maintain microcontroller functionality for as long as possible to provide full monitoring and a software-driven fall-back operation.
The UJA1065 is designed for 14 V single power supply architectures and for 14 V and 42 V dual power supply architectures.
NXP Semiconductors
UJA1065
High-speed CAN/LIN fail-safe system basis chip
2. Features
2.1 General
Contains a full set of CAN and LIN ECU functions: CAN transceiver and LIN transceiver Voltage regulator for the microcontroller (3.3 V or 5.0 V) Separate voltage regulator for the CAN transceiver (5 V) Enhanced window watchdog with on-chip oscillator Serial Peripheral Interface (SPI) for the microcontroller ECU power management system Fully integrated autonomous fail-safe system
Designed for automotive applications: Supports 14 V and 42 V architectures Excellent ElectroMagnetic Compatibility (EMC) performance ±8 kV ElectroStatic Discharge (ESD) protection Human Body Model (HBM) for off-board pins ±4 kV ElectroStatic Discharge (ESD) protection IEC 61000-4-2 for off-board pins ±60 V short-circuit proof CAN/LIN-bus pins Battery and CAN/LIN-bus pins are protected against transients in accordance with ISO 7637-3 Very low sleep current
Supports remote flash programming via the CAN-bus Small 6.1 mm × 11 mm HTSSOP32 package with low thermal resistance
2.2 CAN transceiver
ISO 11898-2 and ISO 11898-5 compliant high-speed CAN transceiver Enhanced error signalling and reporting Dedicated low dropout voltage regulator for the CAN-bus:
Independent from microcontroller supply Guarded by CAN-bus failure management Significantly improves EMC performance Partial networking option with global wake-up feature, allows selective CAN-bus communication without waking up sleeping nodes Bus connections are truly floating when power is off SPLIT output pin for stabilizing the recessive bus level
2.3 LIN transceiver
LIN 2.0 compliant LIN transceiver Enhanced error signalling and reporting Downward compatible with LIN 1.3 and the TJA1020
UJA1065_7
Product data sheet
Rev. 07 — 25 February 2010
© NXP B.V. 2010. All rights reserved.
2 of 76
NXP Semiconductors
UJA1065
High-speed CAN/LIN fail-safe system basis chip
2.4 Power management
Smart operating modes and power management modes Cyclic wake-up capability in Standby and Sleep mode Local wake-up input with cyclic supply feature Remote wake-up capability via the CAN-bus and LIN-bus External voltage regulators can easily be incorporated in the power supply system
(flexible and fail-safe) 42 V battery-related high-side switch for driving external loads such as relays and
wake-up switches Intelligent maskable interrupt output
2.5 Fail-safe features
Safe and predictable behavior under all conditions Programmable fail-safe coded window and time-out watchdog with on-chip oscillator,
guaranteeing autonomous fail-safe system supervision Fail-safe coded 16-bit SPI interface for the microcontroller Global enable pin for the control of safety-critical hardware Detection and detailed reporting of failures:
On-chip oscillator failure and watchdog alerts Battery and voltage regulator undervoltages CAN and LIN-bus failures (short-circuits and open-circuit bus .