10 A RESIN INSULATION TYPE TRIAC
www.DataSheet4U.com
DATA SHEET
AC10DSMA,AC10FSMA
10 A RESIN INSULATION TYPE TRIAC
THYRISTORS
DESCRIPTION
The AC10DSM...
Description
www.DataSheet4U.com
DATA SHEET
AC10DSMA,AC10FSMA
10 A RESIN INSULATION TYPE TRIAC
THYRISTORS
DESCRIPTION
The AC10DSMA and AC10FSMA are resin insulation type TRIACs with an effective current of 10 A (TC = 85°C). These products are covered with resin mold on the entire case and are electrically insulated with electrodes, giving them a
17 ±0.2
PACKAGE DRAWING (Unit: mm)
10.5 MAX. 7 ±0.2 4.7 MAX.
φ 3.2 ±0.2
5 ±0.1
3.0 MAX.
2.8 ±0.2
considerable advantage over conventional TRIACs when mounting on a heatsink board or performing high-density mounting. These products features ratings and electrical characteristics equal to TO-220AB package TRIAC and a high reliability design.
12 ±0.2
1
2 3
*
FEATURES
Insulation type TRIAC fully covered with resin on the entire case other than electrode leads Insulation voltage and conduction equal to conventional mica and polyester film Can be replaced with TO-220AB package High allowable on-current when using a single unit
0.8 ±0.1 2.54 TYP.
1.3 ±0.2 1.5 ±0.2 2.54 TYP.
13.5 MIN.
5 ±0.2
0.5 ±0.1
2.5 ±0.1
TRIAC 1: T1 2: T2 3: Gate
APPLICATIONS
*: TC test bench-mark
Standard weight: 2 g
Non-contact switches of motor speed control, heater temperature control, lamp light control
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics s...
Similar Datasheet