www.DataSheet4U.com
Agilent VTO-8951 Voltage Controlled Oscillator
Data Sheet
Features • Operating frequency: 9.50 to ...
www.DataSheet4U.com
Agilent VTO-8951 Voltage Controlled Oscillator
Data Sheet
Features Operating frequency: 9.50 to 11.0 GHz Output power (50Ω Load): 10 dBm minimum Modulation sensitivity: 150 to 250 MHz/V Description The VTO-8951 provides a fundamental, low jitter source as a key component for the data re-timing in the transmitter subsystem and clock and data recovery in the receiver of the 10 Gb fiber optic systems. The oscillator uses an extremely high performance low noise Agilent Silicon Bipolar
transistor in conjunction with a hyperabrupt varactor diode to provide the tuning capability. The oscillator output is then coupled to through a bandpass filter to the output. Functional Block Diagram Tuning voltage: 0 to 10 Volts Low jitter
Amp Output
Frequency drift over 0°C to +75°C: 100 MHz 0.5" D x 0.18" H Applications Sonet, FEC and 10 Gbits Ethernet Applications Industry standard package – hermetic using thin film construction
VTO-8951 Absolute Maximum Ratings [1] Parameter
Positive Supply Voltage Tuning Voltage Operating Temperature Storage Temperature
Units
V V °C °C
Ratings
5.2 +15 -10 to +100 -40 to +130
Note: 1. Operation of this device in excess of any of these limits may cause permanent damage.
VTO-8951 Summary Characterization, 0°C to 75°C Parameter
Frequency Range Vt @ 9.5 GHz Vt @ 11 GHz Power Output ( 50Ω Load @ 8 V) Modulation Sensitivity Modulation Bandwidth Second Harmonic (Below Carrier) Third Harmonic (Below Carrier) Spurious Outpu...