FPF2102

www.DataSheet4U.com FPF2100-FPF2107 IntelliMAX™ Advanced Load Management Products May 2005 FPF2100-FPF2107 IntelliMAX™ Advanced Load Management Products Features 1.8 to 5.5V Input Voltage Range Controlled Turn-On 200mA and 400mA Current Limit Options Undervoltage Lockout Thermal Shutdown <1uA Shutdown Current Auto restart Fast Current limit Response Time 3us to Moderate Over Currents 20ns to Hard Shorts Fault Blanking General Description The FPF2100 through FPF2107 is a family of load switches which provide full protection to systems and loads which may encounter large current conditions. These devices contain a 0.125Ω current-limited P-channel MOSFET which can operate over an input voltage range of 1.8-5.5V. Switch control is by a logic input (ON) capable of interfacing directly with low voltage control signals. Each part contains thermal shutdown protection which shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating. When the switch current reaches the current limit, the part operates in a constant-current mode to prohibit excessive currents from causing damage. For the FPF2100-FPF2102 and FPF2104-FPF2106, if the constant current condition still persists after 10ms, these parts will shut off the switch and pull the fault signal pin (FLAGB) low. The FPF2100, FPF2101, FPF2104 and FPF2105, have an auto-restart feature which will turn the switch on again after 160ms if the ON pin is still active. The FPF2102 and...