(A67P06361 / A67P16181) Flow-through ZeBL SRAM
www.DataSheet4U.com
A67P16181/A67P06361 Series
Preliminary
Document Title 2M X 18, 1M X 36 LVTTL, Flow-through ZeBLTM S...
Description
www.DataSheet4U.com
A67P16181/A67P06361 Series
Preliminary
Document Title 2M X 18, 1M X 36 LVTTL, Flow-through ZeBLTM SRAM Revision History
Rev. No.
0.0 0.1
2M X 18, 1M X 36 LVTTL, Flow-through ZeBLTM SRAM
History
Initial issue Error Correction: delete BWE pin in block diagram
Issue Date
March 25, 2004 August 6, 2004
Remark
Preliminary
PRELIMINARY
(August, 2004, Version 0.1)
AMIC Technology, Corp.
A67P16181/A67P06361 Series
Preliminary
Features
Fast access time: 6.5/7.5/8.5 ns (153, 133, 117 MHz) Zero Bus Latency between READ and WRITE cycles allows 100% bus utilization Signal +2.5V ± 5% power supply Individual Byte Write control capability Clock enable ( CEN ) pin to enable clock and suspend operations Clock-controlled and registered address, data and control signals Registered output for pipelined applications Three separate chip enables allow wide range of options for CE control, address pipelining Internally self-timed write cycle Selectable BURST mode (Linear or Interleaved) SLEEP mode (ZZ pin) provided Available in 100 pin LQFP package
2M X 18, 1M X 36 LVTTL, Flow-through ZeBLTM SRAM
General Description
The AMIC Zero Bus Latency (ZeBLTM) SRAM family employs high-speed, low-power CMOS designs using an advanced CMOS process. The A67P16181, A67P06361 SRAMs integrate a 2M X 18, 1M X 36 SRAM core with advanced synchronous peripheral circuitry and a 2-bit burst counter. These SRAMs are optimized for 100 percent bus utilization without the insertion of any wait cycl...
Similar Datasheet