CML LOW-POWER LIMITING POST AMPLIFIER w/TTL SD
www.DataSheet4U.com
Micrel, Inc.
3.3V/5V 3.2Gbps CML LOW-POWER LIMITING POST AMPLIFIER w/TTL SD
DESCRIPTION
SY88983V
...
Description
www.DataSheet4U.com
Micrel, Inc.
3.3V/5V 3.2Gbps CML LOW-POWER LIMITING POST AMPLIFIER w/TTL SD
DESCRIPTION
SY88983V
SY88983V
FEATURES
s Multi-Rate up to 3.2Gbps operation s Wide gain-bandwidth product 38dB differential gain 2.2GHz 3dB bandwidth s Low noise 50Ω CML data outputs 800mVpp output swing 60ps edge rates 5psrms typ. random jitter 15pspp typ. deterministic jitter s Chatter-free Signal Detect (SD) output 4.6dB electrical hysteresis OC-TTL output with internal 5kΩ pull-up resistor s Programmable SD sensitivity using single external resistor s Internal 50Ω data input termination s TTL EN input allows feedback from SD s Wide operating range Single 3.3V ±10% or 5V ±10% power supply –40°C to +85°C industrial temperature range s Available in tiny 10-pin MSOP (3mm) and 16-pin MLF™ (3mm × 3mm) packages s NOT RECOMMENDED for New Designs!
APPLICATIONS
s 1.25Gbps and 2.5Gbps Gigabit Ethernet s 1.062Gbps and 2.125Gbps Fibre Channel s 155Mbps, 622Mbps, 1.25Gbps and 2.5Gbps SONET/SDH s Gigabit interface converter (GBIC) s Small form factor (SFF) and small form factor pluggable (SFP) transceivers s Parallel 10G Ethernet s High-gain line driver and line receiver
The SY88983V low-power limiting post amplifier is designed for use in fiber optic receivers. The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The SY88983V quantizes these ...
Similar Datasheet