DatasheetsPDF.com

FBR12 Dataheets PDF



Part Number FBR12
Manufacturers Fujitsu Media Devices
Logo Fujitsu Media Devices
Description 2 POLES-1 to 2 A
Datasheet FBR12 DatasheetFBR12 Datasheet (PDF)

www.DataSheet4U.com MINIATURE RELAY 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES s FEATURES q q q TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D q q q Super miniature size: 0.2 inch × 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom relay. Slim type for high density mounting Conforms to Bellcore TR-NWT-001089 and FCC Part 68 requirements UL recognized and CSA certified Low power consumption Conforms to IEC 950 (W type on.

  FBR12   FBR12



Document
www.DataSheet4U.com MINIATURE RELAY 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES s FEATURES q q q TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D q q q Super miniature size: 0.2 inch × 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom relay. Slim type for high density mounting Conforms to Bellcore TR-NWT-001089 and FCC Part 68 requirements UL recognized and CSA certified Low power consumption Conforms to IEC 950 (W type only) – 2.5 mm clearance and creepage between coil and contacts –5000 V surge strength between coil and contacts (2x10µs surge wave) –2000 Vrms dielectric strength between coil and contacts –UL 1950 and IEC950 (approval in process) NO 12 (d) –P (e) s ORDERING INFORMATION FBR12 N (a) (b) D (c) [Example] (a) (b) (c) –** (–CSA) (f ) (g) Series Name FBR12 : FBR12 Series N W H Enclosure & Coil Power : Standard (plastic sealed type) : High dielectric strength type (plastic sealed type) : High sensitivity type Refer to the COIL DATA CHART Coil Type D : DC coil (d) (e) (f) Nominal Voltage Contact Material Nil –P : Gold-overlay silver-nickel : Gold-overlay silver-palladium Custom Designation CSA Standard To be assigned custom specification (g) –CSA –CSA : UL114 + CSA recognized : UL1950 + CSA (under application) Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR12ND05 Stamp: 12ND05 s SAFETY STANDARD AND FILE NUMBERS UL508, 1950, 114 (File No. E63615) C22.2 No. 0, No. 14 (File No. LR40304 or LR64026) Nominal coil voltage 3 to 24 VDC 0.5 A 125 VDC resistive 2 A 30 VDC resistive 0.3 A 110 VAC resistive Contact rating 1 FBR12 SERIES s SPECIFICATIONS Item Standard (Gold-overlay silver-nickel) Standard Contact Arrangement Material Style Resistance (initial) Rating (resistive) 2 form C (DPDT) Gold-overlay silver-nickel Gold-overlay silver-palladium High dielectric strength type -P type (Gold-overlay silver-palladium) Standard High dielectric strength type TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D Maximum Carrying Current Maximum Switching Power Max. Switching Voltage*1 2 A (at 20°C) 62.5 VA or 60 W 250 VAC or 220 VDC 2A Maximum Switching Current Minimum Switching Load*2 Capacitance (at 10 kHz) 10 µA 10 VDC (reference) Approximately 1.0 pF (between open contacts, adjacent contacts ) Approximately1.0 pF (between coil and contacts) Approximately 0.14 to 0.2 W Approximately 0.23 to 0.25 W Approximately 0.14 to 0.2 W Coil Nominal power (at 20°C) Operate power (at 20°C) Approximately 0.08 to 0.112 W Approximately 0.13 to 0.14 W Approximately 0.08 to 0.112 W Thermal Resistance at Continuous Thermal Load Operating Temperature Operating Humidity Approximately 115°C/W –40°C to +85°C (no frost) (refer to the CHARACTERISTIC DATA) 45 to 85%RH Time Value Operate (at nominal voltage) Maximum 4 msec. Release (at nominal voltage) Max. Switching Frequency Resistance (initial) Maximum 4 msec. Mechanical 3 Hz or electrical 0.5 Hz (at contact rating) Insulation Dielectric between open contacts Strength adjacent contacts between coil and contacts between open contacts, adjacent contacts Minimum 1000 MΩ (at 500 VDC) 1,500 1,000 VAC 750 1 minimum 1,500 VAC 1 min. 1,500 V 10 × 700 µs 2,500 V 2 × 10 µs 10 NO Bifurcated Maximum 100 mΩ (at 0.1 A 6 VDC) 0.5 A 125 VAC or 1 A 30 VDC Approximately 0.23 to 0.25 W Approximately 0.13 to 0.14 W Surge Strength 2,000 VAC 1 min. 2,500 1,250 700 1,500 VAC 1 min. 2,000 VAC 1 min. 2 10 between coil and contacts 5,000 V 2 × 10 µs 2,500 V 2 × 10 µs 5,000 V 2 × 10 µs Life Mechanical Electrical (at contact rating) DC AC 1 × 108 operations minimum 2 × 105 operations minimum 1 × 105 operations minimum 5 × 105 operations minimum 200 × 103 operations minimum Other Vibration Resistance Shock Resistance Weight Misoperation Endurance Misoperation Endurance 10 to 55 Hz (double amplitude of 3.3 mm) 10 to 55 Hz (double amplitude of 5.0 mm) 500 m/s2 (11±1 ms) 1,000 m/s2 ( 6 ±1 ms) Approx. 1.5 g Approx. 1.9 g Approx. 1.5 g Approx. 1.9 g *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 FBR12 SERIES s SPECIFICATIONS Item High Sensitive Type Standard (Gold-overlay silver-nickel) Contact Arrangement Material Style Resistance (initial) Rating (resistive) 2 form C (DPDT) -P type (Gold-overlay silver-palladium) TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D 0.3 A 125 VAC or 1 A 30 VDC Maximum Carrying Current Maximum Switching Power Max. Switching Voltage*1 2 A (at 20°C) 62.5 VA or 30 W 250 VAC or 220 VDC 2A 10m VDC - 10µ A Maximum Switching Current Minimum Switching Load*2 Capacitance (at 10 kHz) Approximately 1.


FAN73832 FBR12 HA5221


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)