Keypad Controller
www.DataSheet4U.com
LM8333 Keypad Controller with I/O Expansion and ACCESS.bus Host Interface
September 2006
LM8333 K...
Description
www.DataSheet4U.com
LM8333 Keypad Controller with I/O Expansion and ACCESS.bus Host Interface
September 2006
LM8333 Keypad Controller with I/O Expansion and ACCESS.bus Host Interface
1.0 General Description
The LM8333 is a general-purpose controller for matrixaddressed keypads which provides an ACCESS.bus (I2Ccompatible) interface to a host microcontroller. It offloads the burden of keyboard scanning from the host, while providing extremely low power consumption in both operational and standby modes. It supports keypad matrices up to 8 x 8 in size (plus another 8 special-function keys), for portable applications such as cellphones, PDAs, games, and other handheld applications. Key press and release events are encoded into a byte format and loaded into a FIFO buffer for retrieval by the host processor. An interrupt output (IRQ) is used to signal events such as keypad activity, a state change on either of two interrupt-capable general-purpose I/O pins, or an error condition. Interrupt and error codes are available to the host by reading dedicated registers. Four general-purpose I/O pins are available, two of which have interrupt capability. A pulse-width modulated output based on a host-programmable internal timer is also available, which can be used as a general-purpose output if the PWM function is not required. To minimize power, the LM8333 automatically enters a lowpower standby mode when there is no keypad, I/O, or host activity. The device is packaged in a 49-pin MICRO...
Similar Datasheet