Satellite channel router
www.DataSheet4U.com
SaTCR-1
Satellite channel router
DATA BRIEF
DESCRIPTION Relaying satellite signals from the roofto...
Description
www.DataSheet4U.com
SaTCR-1
Satellite channel router
DATA BRIEF
DESCRIPTION Relaying satellite signals from the rooftop dish to multiple receivers around the home, Digital Video Recorders (DVR) or throughout an apartment block is an expensive proposition for system installers. The SaTCR-1 satellite channel router addresses this problem by combining up to eight input signals onto a single cable. These signals are then decoded by a corresponding number of tuners, potentially distributed across many set-top boxes. The SaTCR-1 device is intended for use in LNBs or switchers in satellite receivers. The device shifts the frequency of any input signal to a fixed intermediate frequency. The output signal is bandpass filtered generating a narrow band output. By combining several SaTCR-1 devices, a corresponding number of sub-bands may be generated and multiplexed together. This composite band can be made of different independent channels issued from different LNB
inputs and polarizations, and can be carried on a single coaxial cable. Figure 1. Package: QFN36 (6 x 6 mm)
xxxx
Figure 2. Single cable installation for multi-satellite receivers
Basic satellite channel routing application Optional legacy output
BPF
BPF
X X
BPF
4x2 or 4x3 matrix
®
SaTCR
LO LO
Σ
®
Single coaxial cable
Choke Choke
BPF BPF
X X
BPF
SaTCR
PC PC
®
DVR Rx
ST7LNB1
Rev. 1 October 2004 1/2
www.DataSheet4U.com
SATCR-1
FEATURES ■ Wide input and wide output frequency ranges (950 MHz to 2150 MHz)
■ ■...
Similar Datasheet