Dual USB High Side Power Switch
www.DataSheet4U.com
Bay Linear
Inspire the Linear Power
Dual USB High Side Power Switch
B2526
Description
The Bay Li...
Description
www.DataSheet4U.com
Bay Linear
Inspire the Linear Power
Dual USB High Side Power Switch
B2526
Description
The Bay Linear B2526 is a dual high-side power switch recommended for self-powered and bus-powdered universal serial for bus (USB) application conforming to USB requirements. USB voltage drop requirements, fault current limited to 750mA, flag output to indicate fault connections to the local USB controller are features that meet USB requirements. Additional features such as thermal shutdown to prevent catastrophic switch failure from excessively high current loads, under voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present, and 3.3V or 5V logic compatible enable inputs. Two versions of the enable pin, Active High or Active Low are available in 8pin Dip and 8-pin SOIC packages.
Features
3.0V to 5.5V Input 110µA Typical on-State Supply Current 1µA Typical off-State Supply Current 500mA Minimum Continuous Load Current 1.25A Maximum Current Limit 2.4V Typical Under Voltage Lockout (UVLO) Open-Drain Fault Flag Pin Thermal Shutdown Available with Active-High or Active-Low Enable
Applications
USB Host and self-Powered Hubs USB Power Management Battery-Charger Circuits Hot Plug-In Power Supplies Bus-Powered Hubs
Package Information
Ordering Information
Package
SO-8 8 DIP Active High B2526-1M B2526-1P
Enable
Active Low B2526-2M B2526-2P
8
Out (A)
SO-8
EN (A) FLAG (A) FLAG (B) EN (B) 1 2 ...
Similar Datasheet