Fiber Channel / Gigabit Ethernet Transimpedance Amplifier
www.DataSheet4U.com
TZA3046
Fiber Channel/Gigabit Ethernet transimpedance amplifier
Rev. 01 — 19 May 2006 Product data s...
Description
www.DataSheet4U.com
TZA3046
Fiber Channel/Gigabit Ethernet transimpedance amplifier
Rev. 01 — 19 May 2006 Product data sheet
1. General description
The TZA3046 is a transimpedance amplifier with Automatic Gain Control (AGC), designed to be used in Fiber Channel/Gigabit Ethernet (FC/GE) fiber optic links. It amplifies the current generated by a photo detector (PIN diode or avalanche photodiode) and converts it to a differential output voltage. It offers a current mirror of average photo current for RSSI monitoring to be used in SFF-8472 compliant modules. The low noise characteristics makes it suitable for FC/GE applications, but also for FTTx applications.
CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling.
2. Features
I I I I I I I I I I Low equivalent input noise current, typically 126 nA (RMS) Wide dynamic range, typically 2.5 µA to 1.7 mA (p-p) Differential transimpedance of 7.5 kΩ (typical) Bandwidth from DC to 1050 MHz (typical) Differential outputs On-chip AGC with possibility of external control Single supply voltage 3.3 V, range 2.97 V to 3.6 V Bias voltage for PIN diode On-chip current mirror of average photo current for RSSI monitoring Identical ports available on both sides of die for easy bond layout and RF polarity selection
3. Applications
I Digital fiber optic receiver modules in telecommunications transmission systems, in high-speed data networks or in FTTx systems.
DataSheet 4 U .co...
Similar Datasheet