MAX19588

www.DataSheet4U.com 19-0513; Rev 0; 5/06 KIT ATION EVALU E L B A AVAIL High-Dynamic-Range, 16-Bit, 100Msps ADC with -82dBFS Noise Floor General Description Features ♦ 100Msps Conversion Rate ♦ -82dBFS Noise Floor ♦ Excellent Low-Noise Characteristics SNR = 79.4dB at fIN = 10MHz SNR = 79dB at fIN = 70MHz ♦ Excellent Dynamic Range (SFDR1/SFDR2) 93.2dBc/102.5dBc at fIN = 10MHz 82.1dBc/97.7dBc at fIN = 70MHz ♦ Less than 0.1ps Sampling Jitter ♦ 1275mW Power Dissipation ♦ 2.56VP-P Fully Differential Analog Input Voltage Range ♦ CMOS-Compatible Two’s-Complement Data Output ♦ Separate Data Valid Clock and Over-Range Outputs ♦ Flexible Input Clock Buffer ♦ Small 56-Pin, 8mm x 8mm x 0.8mm Thin QFN Package ♦ EV Kit Available for MAX19588 (Order MAX19588EVKIT) MAX19588 The MAX19588 is a 3.3V, high-speed, high-performance analog-to-digital converter (ADC) featuring a fully differential wideband track-and-hold (T/H) and a 16-bit converter core. The MAX19588 is optimized for multichannel, multimode receivers, which require the ADC to meet very stringent dynamic performance requirements. With a -82dBFS noise floor, the MAX19588 allows for the design of receivers with superior sensitivity requirements. At 100Msps, the MAX19588 achieves a 79dB signal-tonoise ratio (SNR) and an 82.1dBc/97.7dBc single-tone spurious-free dynamic range performance (SFDR1/ SFDR2) at fIN = 70MHz. The MAX19588 is not only optimized for excellent dynamic performance in the 2nd Nyquist region, but also for high-IF...