RPM960-H7

www.DataSheet4U.com RPM960-H7 Photo Link Module IrDA Infrared Communication Module RPM960-H7 RPM960-H7 is an infrared communication module for IrDA Ver. 1.3 (Low Power). The infrared LED, PIN photo diode, and waveform shaping LSI are all integrated into one single package. This module is designed for low power consumption. The very small package makes it a perfect fit for mobile devices. zFeatures 1) Infrared LED, PIN photo diode, LED driver & Receiver frequency formation circuit built in. Improvement of EMI noise protection because of Shield Case. 2) Applied to SIR (2.4 k to 115.2 kbps) and MIR (0.576,1.152 Mbps) 3) Surface mount type. 4) Power down function built in. 5) Adjustable communication distance by LED load resistance value. zApplications Cellular Phone, PDA, DVC, Digital Still Camera, Printer, Handy Terminal, etc zAbsolute maximum ratings (Ta = 25°C) Parameter Supply Voltage Input Voltage Operation Temperature Storage Temperature LED Peak Current Power Dissipation Symbol Vcc/LEDVCC/VIO Vin(3,4,5pin) Topr Tstg Ifp Pd Limits 6.5 ∗1 −0.3∼VIO+0.3 −25∼85 −30∼100 400 ∗2 300 ∗3 Unit V V ˚C ˚C mA mW ∗1) This applies to all pins basis ground pin (8pin). ∗2) LED Peak Current : <90 µs, On duty <25% ∗3) When glass-epoxy board (70x70x1.6mm) mounted. In case of operating environment is over 25˚C, 4mW would be reduced per each 1˚C stepping up. zRecommended operating conditions (Ta = 25°C) Parameter Supply voltage Symbol VCC LEDVCC VIO Min. 2.4 2.7 1.8 Typ. 3.0 3.0 3.0 Max....