TPD4104AK

www.DataSheet4U.com TPD4104AK TOSHIBA Intelligent Power Device High Voltage Monolithic Silicon Power IC TPD4104AK The TPD4104AK is a DC brush less motor driver using high voltage PWM control. It is fabricated by high voltage SOI process. It contains level shift high-side driver, low-side driver, IGBT outputs, FRDs and protective functions for under voltage protection circuits and thermal shutdown circuit. It is easy to control a DC brush less motor by just putting logic inputs from a MPU or motor controller to the TPD4104AK. Features Bootstrap circuit gives simple high side power supply. Bootstrap diodes are built in. A dead time can be set as a minimum of 1.4 µs, and it is the best for a Sine-wave from drive. 3-phase bridge output using IGBTs. FRDs are built in. Included under voltage protection and thermal shutdown. The regulator of 7V (typ.) is built in. Package: 23-pin HZIP. This product has a MOS structure and is sensitive to electrostatic discharge. When handling this product, ensure that the environment is protected against electrostatic discharge. Weight HZIP23-P-1.27F : 6.1 g (typ.) HZIP23-P-1.27G : 6.1 g (typ.) HZIP23-P-1.27H : 6.1 g (typ.) 1 DataSheet 4 U .com 2005-01-31 www.DataSheet4U.com TPD4104AK Pin Assignment 1 HU 2 3 HV HW 4 LU 5 LV 6 7 LW IS1 8 9 10 11 12 13 NC BSU U VBB 1 BSV V 14 15 16 17 18 19 20 21 22 23 BSW W VBB 2 NC IS2 NC DIAG VCC GND VREG Marking Lot No. TPD4104AK JAPAN Part No. (or abbreviation code) A line in...