www.vishay.com
CDR-MIL-PRF-55681
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type CDR
FEATURES
• Military qualified products
• Federal stock control number, CAGE CODE 2770A
• High reliability tested per MIL-PRF-55681
Available Available
• Tin / lead termination codes “W”, “Z”, and “U”
• Lead (Pb)-free termination codes “Y” and “M”
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details
APPLICATIONS • Avionic systems • Sonar systems • Satellite systems • Missiles applications • Geographical information systems • Global positioning systems
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 1.0 pF to 470 nF
Voltage Range: 6.3 VDC to 100 VDC
Temperature Coefficient of Capacitance (TCC):
BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C, with 0 VDC applied 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C, with 100 % rated VDC applied
BX: ± 15 % from -55 °C to +125 °C, with 0 VDC applied BX: +15 %, -25 % from -55 °C to +125 °C,
with 100 % rated VDC applied BR: ± 15 % from -55 °C to +125 °C,
with 0 VDC applied +15 %, -40 % -55 °C to +125 °C, with 100 % rated VDC applied
Dissipation Factor (DF):
BP: 0.15 % maximum BX: 2.50 % maximum BR: ≤ 25 V: 3.5 % maximum
> 25 V: 2.5 % maximum Test frequency: 1 MHz ± 50 kHz for BP capacitors ≤ 1000 pF and for BX capacitors ≤ 100 pF All other BP, BX, and BR at 1 kHz ± 50 Hz
Aging Rate:
BP: 0 % maximum per decade BX, BR: 1 % maximum per decade
Insulation Resistance (IR):
at +25 °C and rated voltage 100 000 MΩ minimum or 1000 ΩF, whichever is less
Dielectric Strength Test:
performed per method 103 of EIA-198-2-E. Applied test voltages: ≤ 100 VDC-rated: 250 % of rated voltage
Revision: 10-Aug-2020
1
Document Number: 45026
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
CDR-MIL-PRF-55681
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
STYLE (CASE)
BP
CDR01 (0805)
BX
CDR01 (0805)
BP
CDR02 (1805)
BX
CDR02 (1805)
BP
CDR03 (1808)
BX
CDR03 (1808)
BP
CDR04 (1812)
BX
CDR04 (1812)
BX
CDR06 (2225)
BP
CDR31 (0805)
BX
CDR31 (0805)
BP
CDR32 (1206)
BX
CDR32 (1206)
BP
CDR33 (1210)
BX
CDR33 (1210)
BP
CDR34 (1812)
BX
CDR34 (1812)
BP
CDR35 (1825)
BX
CDR35 (1825)
BP
CDR36 (0603)
BX
CDR36 (0603)
BR
CDR36 (0603)
BP
CDR37 (0402)
BX
CDR37 (0402)
BR
CDR37 (0402)
Note • Detail ratings see selection chart
MAXIMUM VOLTAGE (V)
100 100 100 100 100 100 100 100 50 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50
CAPACITANCE
MINIMUM
MAXIMUM
10 pF
180 pF
120 pF
4.7 nF
220 pF
270 pF
3.9 nF
22 nF
330 pF
1.0 nF
12 nF
68 nF
1.2 nF
3.3 nF
39 nF
180 nF
390 nF
470 nF
1.0 pF
680 pF
470 pF
18 nF
1.0 pF
2.2 nF
4.7 nF
39 nF
1.0 nF
3.3 nF
15 nF
100 nF
2.2 nF
10 nF
27 nF
180 nF
4.7 nF
22 nF
56 nF
470 nF
51 pF
1000 pF
100 pF
56 nF
100 pF
56 nF
22 pF
150 pF
100 pF
8.2 nF
100 pF
10 nF
ORDERING INFORMATION - MILITARY
CDR31
BX
102
A
K
MILITARY DIELECTRIC CAPACITANCE
DC
CAPACITANCE
STYLE
NOMINAL CODE VOLTAGE TOLERANCE (2)
RATING (1)
Y TERMINATION
S
FAILURE RATE
A
T
MARKING PACKAGING
CDR01
BP
Expressed in W = 6.3 V C = ± 0.25 pF
M = silver
M = 1.0 %
A=
CDR02
BR
picofarads (pF). X = 10 V D = ± 0.5 pF
palladium (3)
P = 0.1 % unmarked
CDR03
BX
The first two
Y = 16 V
F=±1%
Y = Ni barrier
R = 0.01 %
CDR04 CDR06
digits are significant, the
Z = 25 V A = 50 V
G=±2% J=±5%
with 100 % tin W, Z = Ni barrier
S = 0.001 % Consult
T = 7" reel / plastic tape
CDR31
third is a
B = 100 V K = ± 10 % with tin / lead plate factory for J = 7" reel (low quantity)
CDR32
multiplier.
M = ± 20 %
min. 4 % lead
failure rate C = 7" reel / paper tape
CDR33 CDR34 CDR35 CDR36
Examples: 102 = 1000 pF 1R8 = 1.8 pF
U = Ni barrier solder coated (min. of 4 % lead)
status
R = 11 1/4" / 13" reel / plastic tape
P = 11 1/4" / 13" reel / paper tape
CDR37
B = bulk
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions:
[email protected]
(2) Available tolerances please see rating chart (3) M termination not available for CDR36 and CDR37 parts
Revision: 10-Aug-2020
2
Document Number: 45026
For technical questions, contact.