LOW-VOLTAGE CMOS OCTAL TRANSCEIVER/ REGISTERED TRANSCEIVER
www.DataSheet4U.com
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Low-Voltage Quiet Transceiver
(3-State, Non-Inverting)
CMOS...
Description
www.DataSheet4U.com
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Low-Voltage Quiet Transceiver
(3-State, Non-Inverting)
CMOS
Octal Transceiver/Registered
MC74LVQ646
The MC74LVQ646 is a high performance, non–inverting octal transceiver/registered transceiver operating from a 2.7 to 3.6V supply. High impedance TTL compatible inputs significantly reduce current loading to input drivers while TTL compatible outputs offer improved switching noise performance. The MC74LVQ646 is suitable for memory address driving and all TTL level bus oriented transceiver applications. Data on the A or B bus will be clocked into the registers as the appropriate clock pin goes from a LOW–to–HIGH logic level. Output Enable (OE) and DIR pins are provided to control the transceiver outputs. In the transceiver mode, data present at the high impedance port may be stored in either the A or the B register or in both. The select controls (SBA, SAB) can multiplex stored and real–time (transparent mode) data. The direction control (DIR) determines which bus will receive data when the enable OE is active LOW. In the isolation mode (OE HIGH), A data may be stored in the B register or B data may be stored in the A register. Only one of the two buses, A or B, may be driven at one time.
LVQ
LOW–VOLTAGE CMOS OCTAL TRANSCEIVER/ REGISTERED TRANSCEIVER
DW SUFFIX PLASTIC SOIC CASE 751E–04
1
24
Designed for 2.7 to 3.6V VCC Operation – Ideal for Low Power/Low
Noise Applications
24 1
Guaranteed Simultaneous Switch...
Similar Datasheet