CABLE ASSEMBLY INSTRUCTION
www.DataSheet4U.com
C A B L E
A S S E M B L Y
I N S T R U C T I O N
Controller Model: Maple OIT Model:
Modicon TSX3...
Description
www.DataSheet4U.com
C A B L E
A S S E M B L Y
I N S T R U C T I O N
Controller Model: Maple OIT Model:
Modicon TSX3710 HMI500 Series
Communication Type: RS-485 with Mini DIN 8 Pin connector at PLC
Use the wiring diagram and illustration to assemble a communication cable for use with the TER port on a Modicon TSX3710 PLC. Select Modbus Generic Network in OITware when connecting to a TSX PLC.
4-40 x 1/2 Retainer 18 AWG Green wire Screw, 2 places DE9S Connector & DE9 Backshell
To Chassis Ground
A Mini DIN 8 Pin Connector
2 Pair Twisted 24 AWG Shielded cable
ee DataSh
DataSheet4U.com
A
OIT END
PLC END
NOTES: Twist together 18 AWG green wire and shield wire. Solder 1 wires and insulate with heatshrink to avoid shorting. OIT
1 Shield Green
9S
To Chassis Ground PLC
RXD- 1 RXD+ 2 Return 5 TXD- 3 TXD+ 4
8 5 2
7 4 1
6 3
DIN 8 7 0 VOLT 2 D (A) 1 D (B)
Pin Configuration View A-A (Solder Side)
DataSheet4U.com
1023-0081, Rev 00
DataSheet 4 U .com
...
Similar Datasheet