DatasheetsPDF.com

G104SN03V2 Dataheets PDF



Part Number G104SN03V2
Manufacturers Data Modul
Logo Data Modul
Description TFT LCD Module
Datasheet G104SN03V2 DatasheetG104SN03V2 Datasheet (PDF)

www.DataSheet4U.com Specification for G104SN03 V2 06 / Feb / 04 DataSheet4U.com DataShe e Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 – www.data-modul.de DataSheet4U.com DataSheet 4 U .com www.DataSheet4U.com Version: 1.0 Total Pages: 28 Date: February 6, 2004 Product Functional Specification 10.4 inch SVGA Color TFT LCD Module Model Name: G104SN03 V.2 DataSheet4U.com et4U.com e DataShe ( u ) Preliminary Specification ( ) Final Specif.

  G104SN03V2   G104SN03V2


Document
www.DataSheet4U.com Specification for G104SN03 V2 06 / Feb / 04 DataSheet4U.com DataShe e Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 – www.data-modul.de DataSheet4U.com DataSheet 4 U .com www.DataSheet4U.com Version: 1.0 Total Pages: 28 Date: February 6, 2004 Product Functional Specification 10.4 inch SVGA Color TFT LCD Module Model Name: G104SN03 V.2 DataSheet4U.com et4U.com e DataShe ( u ) Preliminary Specification ( ) Final Specification Note: This Specification is subject to change without notice. DataSheet4U.com (C) Copyright AU Optronics, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G104SN03 V.2 2/28 DataSheet4 U .com www.DataSheet4U.com I. Contents 1.0 2.0 Handling Precautions General Description 2.1 Display Characteristics 2.2 Functional Block Diagram Absolute Maximum Ratings Optical Characteristics Signal Interface 5.1 Connectors 5.2 Signal Pin 5.3 Signal Description 5.4 Signal Electrical Characteristics Pixel Format Image Power Consumption Interface Timing 8.1 Display Color v.s. Input Data Signal 8.2 Input Signal Timing 8.3 Display Position 5 6 3.0 4.0 5.0 9 10 12 6.0 7.0 8.0 16 17 19 et4U.com e DataShe 9.0 Backlight Characteristics 23 DataSheet4U.com 10.0 Touch Panel Specification….………………………………………………24 10.1 Operating Condition 10.2 Electrical Characteristic 10.3 Mechanical Characteristic 10.4 Touch Panel Outline Dimension 11.0 Reliability Test Items 12.0 Display Quality 13.0 Packing Dimension 14.0 Mechanical Characteristic 26 26 27 28 DataSheet4U.com (C) Copyright AU Optronics, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G104SN03 V.2 3/28 DataSheet 4 U .com www.DataSheet4U.com II. Record of Revision Version and Date Page 1.0 Feb. 6, 2004 All Old description N/A New Description First Edition for Customers Remark et4U.com e DataShe DataSheet4U.com DataSheet4U.com (C) Copyright AU Optronics, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G104SN03 V.2 4/28 4 U .com DataSheet www.DataSheet4U.com 1.0 Handing Precautions 1) Since front polarizer is easily damaged, pay attention not to scratch it. 2) Be sure to turn off power supply when inserting or disconnection from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. 7) Do not open nor modify the module Assembly. 8) Do not press the reflector sheet at the back of the module to any directions. 9) In case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT module may be damaged. 10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the interface Connector of the TFT module. 11) After installation of the TFT module into an enclosure, do not twist nor bend the TFT module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT module from outside. Otherwise the TFT module DataSheet4U.com 12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local et4U.com e DataShe may be damaged. ordinances or regulations for disposal. 13) Small amount of materials having no flammability grade is used in the LCD module should be supplied by power complied with requirements of Limited Power Source, or be applied exemption. 14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit. Do not connect the CFL in Hazardous Voltage Circuit. DataSheet4U.com (C) Copyright AU Optronics, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G104SN03 V.2 5/28 DataSheet 4 U .com www.DataSheet4U.com 2.0 General Description This specification applies to the 10.4 inch color TFT LCD module G104SN03 V.2. This module is designed for General Display. The screen format is intended to support the SVGA (800(H) x 600(V)) screen and 262k colors (RGB 6-bits data driver). All input signals are LVDS interface compatible. The module does not contain an inverter card for backlight. Features - SVGA 800(H) x600(V) resolution - 1 CCFL(Cold cathode Fluorescent Lamp) - High contrast ratio, High transmittance ratio - Wide viewing angle - High speed response - Low power consumption - LVDS interface et4U.com Applications Information Appliance Industrial Application DataSheet4U.com e DataShe DataSheet4U.com (C) Copyright AU Optronics, Inc. 2004 All Right Reserved. No Reproduc.


G104SN03V0 G104SN03V2 G104SN05


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)