MINISMDC150

www.DataSheet4U.com Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 800-227-4856 FAX 800-227-4866 RAYCHEM PolySwitch® PTC Devices Overcurrent Protection Device PRODUCT: miniSMDC150 DOCUMENT: SCD 24264 PCN: 439545 REV LETTER: F REV DATE: OCTOBER 25, 2000 PAGE NO.: 1 OF 1 Specification Status: Maximum Electrical Rating Voltage: 6V DC Short Circuit Current: 100A RELEASED D E C Notes: 1. All terminations are tin/lead plated. 2. Devices can be wave soldered. 3. Drawing not to scale Marking: Manufacturer's Mark Marking D E 15 Part Identification TABLE I. DIMENSIONS: A B C D E DataSheet4U.com MIN MAX MIN MAX MIN MAX MIN MIN MAX mm: 4.37 4.73 3.07 3.41 0.28 0.48 0.25 0.20 0.50 in: (0.172) (0.186) (0.121) (0.134) (0.011) (0.019) (0.010) (0.008) (0.020) e DataShe TABLE II. PERFORMANCE RATINGS: IHOLD ** HOLD CURRENT AT TEMPERATURE** TIME TO RATED TRIP ** CURRENT @ 8.0A AMPERES AMPERES AMPERES AMPERES SECONDS AT 20°C AT - 40°C AT 20°C AT 55°C AT 20°C HOLD HOLD HOLD HOLD MAX 1.5 2.30 1.50 1.00 0.5 RESISTANCE VALUES OHMS AT 20°C MIN MAX* 0.040 0.110 **TRIPPED-STATE POWER DISSIPATION WATTS AT 20°C MAX 0.8 * Maximum resistance is measured 1 hour after reflow. **Values Specified were determined using PCB’s with 0.030”X1.5 ounce copper traces. Reference Documents: Precedence: Effectivity: CAUTION: PS300, E. N. SMD1.0x This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date o...