DatasheetsPDF.com

MS-151 Dataheets PDF



Part Number MS-151
Manufacturers Hirose Electric
Logo Hirose Electric
Description Interface RF Connector with Switch
Datasheet MS-151 DatasheetMS-151 Datasheet (PDF)

www.DataSheet4U.com Interface RF Connector with Switch MS-151 Series sOverview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight and high reliability makes it ideal for use in 2.4 GHz band wireless LAN applications. Plug can be rotated after full insertion. sFeatures 1. Confirmation of complete connection Built-in interlock feature confirms fully mated condition with a "click" sensation. 2..

  MS-151   MS-151


Document
www.DataSheet4U.com Interface RF Connector with Switch MS-151 Series sOverview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight and high reliability makes it ideal for use in 2.4 GHz band wireless LAN applications. Plug can be rotated after full insertion. sFeatures 1. Confirmation of complete connection Built-in interlock feature confirms fully mated condition with a "click" sensation. 2. Non-directional connection The connector can be mated in any position on a 360° axis and can rotate within the same when in use, allowing routing of the connected cable in any direction. DataSheet4U.com qReceptacle Guaranteed 5000 insertion/removal cycles. DataShee 3. High durability 4. Space-saving The external dimensions of the board-mounted receptacle (5.0 mm high, 6.5 mm wide, 7.0 mm deep) makes it ideal for use in small devices. 5. Ease of connection and handling Over-molded plug, with convenient grip and built-in cable strain relief assures reliable mating/un-mating by end user. 6. Designed for board placement with automatic equipment Top surface of receptacle assembly is flat, allowing reliable hold for vacuum nozzles of automatic placement equipment. qPlug MS-151 sApplications GPS terminals, wireless LAN modules, notebook computers, PDA, and other high frequency equipment. (Page 7 lists applications and antenna circuit switching examples.) MS-151-C(LP) qSMA Conversion Adapter For Receptacle: MS-151 qSMA Conversion Adapter For Plug: MS-151-C(LP) DataSheet4U.com MS151P-HRMJ MS151J-HRMJ DataSheet 4 U .com 124 www.DataSheet4U.com sProduct Specifications Frequency range Operating temperature range Power rating 1 DC to 1 GHz DC to 3GHz -40ç to +85ç 4W Not mated with the plug 1.2dBmax. 1.4dBmax. 1.7dBmax. 0.2dB 0.4dB 0.6dB max. max. max. 0.3dB 0.5dB 1.0dB 20dB 18dB 12dB max. max. max. min. min. min. Mated(MS-151-C-(LP)) V.S.W.R. 1 GHz to 2 GHz 2 GHz to 3 GHz 1 DC to 1 GHz Insertion loss 1 GHz to 2 GHz 2 GHz to 3 GHz 1 DC to 1 GHz ------------------------------------------ Isolation loss 1 GHz to 2 GHz 2 GHz to 3 GHz Item Specification Conditions 100 mA 100 V DC 100 V AC / 1 minute Frequency: 10 to 500 Hz, single amplitude of 0.75 mm, acceleration of 98 m/s2 for 2 hours in each of the 3 directions Acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature: -55ç / +5ç to +35ç / +85ç / +5ç to +35ç Time: 30 / 5 max. / 30 / 5 max.(Minutes) 100 cycles 96 hours at temperature of 40ç and humidity of 90% 1. Contact resistance 50 m ohms max. 2. Insulation resistance 1000 M ohms min. 3. Withstanding voltage No flashover or insulation breakdown 4. Vibration No electrical discontinuity of 10 µ s or more 5. Shock 6. Temperature cycle 7. Humidity 7. (Steady state) et4U.com Contact resistance: 100 m ohms max. Insulation resistance: 10 M ohms min. DataShee DataSheet4U.com Contact resistance: 100 m ohms max. 8. Salt spray No corrosions Insertion force: 1~10N 9. Insertion/Withdrawal forces Withdrawal force: 3~15N 10. Durability Contact resistance: 100 m ohms max. 10. (insertion/ withdrawal) 5% salt water solution, 48 hours (at 35ç) With corresponding connector 5000 cycles sMaterials Receptacle MS-151 Part Insulator Lock mating section Outer conductor shell Contact A Contact C Material Polyamide (UL 94V-0) Stainless steel Phosphor bronze Phosphor bronze Beryllium copper Finish --------------Nickel plating (Termination area: tin-lead plated) Nickel plating (Termination area: tin-lead plated) Gold plating Gold plating Plug MS-151-C(LP) Part Cover A Cover B Ring Outer conductor shell Inner contact Insulator Ferrule Crimp metal fitting Bushing Material PC PC Stainless steel Phosphor bronze Phosphor bronze Polyamide (UL 94-HB) Stainless steel Brass Polyester Finish ----------------------------- Nickel plating Nickel plating Gold plating ----------------------------- Nickel plating --------------- DataSheet4U.com DataSheet 4 U .com 125 www.DataSheet4U.com BTypical data qNORMALLY CLOSED(N.O) ~ (Not mated with the plug) : V.S.W.R. SPEC : INSERTION LOSS SPEC : ISOLATION SPEC INSERTION LOSS [dB] 0 0.2 INSERTION LOSS 0.4 0.6 0.8 1.0 V.S.W.R. 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 et4U.com V.S.W.R. V.S.W.R. DC 1.0 2.0 3.0 [GHz] DataShee DataSheet4U.com qOPEN(N.O) ~ (Mated with the plug) INSERTION LOSS [dB] 0 0.2 0.4 0.6 0.8 1.0 0 INSERTION LOSS 1.7 1.6 1.5 1.4 1.3 V.S.W.R. 1.2 1.1 ISOLATION 1.0 ISOLATION [dB] 10 20 30 40 DC 1.0 2.0 3.0 [GHz] DataSheet4U.com DataSheet 4 U .com 126 www.DataSheet4U.com sReceptacle et4U.com Part Number MS-151 CL No. 358-0158-7-01 358-0158-7-01 Packaging 1,000 pieces per reel 100 pieces DataShee DataSheet4U.com MS-151(01) BCircuit diagram Not mated with the plug(N.C) Mated with the plug(N.O) G B G G A C G G B G G A C G BPCB mounting pattern 2-Ø 1.2 2.5 (Th rou gh 3 ole ) 1.35 2 1.65 2.3.


STA323W MS-151 MS-156


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)