Interface RF Connector with Switch
Designed for end user applications requiring re-
direction of transmission from internal built-in
antenna to the external antenna. Small size,
lightweight and high reliability makes it ideal for
use in 2.4 GHz band wireless LAN applications.
Plug can be rotated after full insertion.
1. Confirmation of complete connection
Built-in interlock feature confirms fully mated condition
with a "click" sensation.
2. Non-directional connection
The connector can be mated in any position on a 360°
axis and can rotate within the same when in use,
allowing routing of the
Guaranteed 5000 insertion/removal cycles.
The external dimensions of the board-mounted
receptacle (5.0 mm high, 6.5 mm wide, 7.0 mm deep)
makes it ideal for use in small devices.
5. Ease of connection and handling
Over-molded plug, with convenient grip and built-in cable
strain relief assures reliable mating/un-mating by end user.
6. Designed for board placement with automatic
Top surface of receptacle assembly is flat, allowing
reliable hold for vacuum nozzles of automatic placement
GPS terminals, wireless LAN modules, notebook computers,
PDA, and other high frequency equipment.
(Page 7 lists applications and antenna circuit switching
qSMA Conversion Adapter qSMA Conversion Adapter
For Receptacle: MS-151
For Plug: MS-151-C(LP)
Dat1a2S4heet4 U .com