TC74HC574AFW

TC74HC564AP/AF,574AP/AF/AFW TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HC564AP,TC74HC564AF TC74HC574AP,TC74HC574AF,TC74HC574AFW Octal D-Type Filp-Flop with 3-State Output TC74HC564AP/AF Inverting TC74HC574AP/AF/AFW Non-Inverting The TC74HC564A and HC574A are high speed CMOS OCTAL FLIP-FLOPs with 3-STATE OUTPUT fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. These 8-bit D-type flip-flops are controlled by a clock input (CK) and an output enable input ( OE ). The TC74HC564A has inverting outputs, and the TC74HC574A has non-inverting outputs. All inputs are equipped with protection circuits against static discharge or transient excess voltage. Note: xxxFW (JEDEC SOP) is not available in Japan. TC74HC564AP, TC74HC574AP TC74HC564AF, TC74HC574AF Features High speed: fmax = 62 MHz (typ.) at VCC = 5 V Low power dissipation: ICC = 4 µA (max) at Ta = 25°C High noise immunity: VNIH = VNIL = 28% VCC (min) Output drive capability: 15 LSTTL loads Symmetrical output impedance: |IOH| = IOL = 6 mA (min) Balanced propagation delays: tpLH ∼− tpHL Wide operating voltage range: VCC (opr) = 2 to 6 V Pin and function compatible with 74LS564/574 TC74HC574AFW Weight DIP20-P-300-2.54A SOP20-P-300-1.27A SOP20-P-300-1.27 SOL20-P-300-1.27 : 1.30 g (typ.) : 0.22 g (typ.) : 0.22 g (typ.) : 0.46 g (typ.) 1 2006-02-01 Pin Assignment TC74HC564A TC7...