DatasheetsPDF.com

TDA4481-D Dataheets PDF



Part Number TDA4481-D
Manufacturers TEMIC Semiconductors
Logo TEMIC Semiconductors
Description Multistandard quasi parallel-sound processor for Mono-TV-Sets
Datasheet TDA4481-D DatasheetTDA4481-D Datasheet (PDF)

www.DataSheet4U.com TELEFUNKEN Semiconductors TDA4481-D Multistandard quasi parallel-sound processor for Mono-TV-Sets Technology: Bipolar Features D High signal sensitivity D High signal to noise ratio D Easy alignment of the multistandard filters D Converter for different intercarrier frequencies D AF output level matched to SIMAVELEC condition D Few external components D Alignment free AM demodulator for standard L D Standardized SCART interface D Standard-, SCART- and Mute-switch TTL compa.

  TDA4481-D   TDA4481-D


Document
www.DataSheet4U.com TELEFUNKEN Semiconductors TDA4481-D Multistandard quasi parallel-sound processor for Mono-TV-Sets Technology: Bipolar Features D High signal sensitivity D High signal to noise ratio D Easy alignment of the multistandard filters D Converter for different intercarrier frequencies D AF output level matched to SIMAVELEC condition D Few external components D Alignment free AM demodulator for standard L D Standardized SCART interface D Standard-, SCART- and Mute-switch TTL compatible D AF attenuator D ESD protected Case: 20-pin dual inline plastic w w w a D . Rev. A1: 23.02.1995 S a t e e h U 4 t m o .c Figure 1 Block diagram 1 (10) www.DataSheet4U.com TDA4481-D Pin Configuration Pin 1–2 3 4 5 6 7 8 9 10 Function Picture-IF-carrier input SCART-switch AGC storage capacitor SCART-AF input Standard switch AF output (controlled) Volume control voltage SCART-AF output VC0 tank circuit Pin 11 12–13 14 15 16 17 18–19 20 TELEFUNKEN Semiconductors Function Ground FM demod. circuit 5.5 MHz FM deemphasis capacitor Intercarrier output 5.5 MHz Supply voltage Intercarrier input 5.5 MHz and muting Sound-IF-carrier input not connected Description This circuit configuration permits high-quality processing of audio carriers for all standards, providing separate inputs for the video and audio carriers. The audio carrier signal (FM or AM) is passed to two multiplying mixer arrangements via a 3-stage variable wide-band amplifier with levelled output signals. One mixer demodulates AM and generates the gain control signal. The second mixer operates as an intercarrier demodulator and supplies the intermediate AF carrier. The video carrier signal required to form the intercarrier is decoupled in a prelimited and selected form from the demodulator tank of the intermediate video frequency circuit (TDA 4453 or TDA 4439) and led to the intercarrier mixer via a limiting amplifier. By virtue of the system, the Nyquist range of the IF input filter in the video channel affects the attainable AF signal-to-noise ratio. The audio FM IF carrier reaches a quadrature demodulator via an interconnected IF-filter and subsequent limiting amplifier. The resulting AF signal is led via a low-pass amplifier with increased level and the AF standard switch to the SCART switch. It is available at both AF outputs, regulated (pin 7) and unregulated (pin 9). Pin 14 is provided to connect a de-emphasis capacitor (10 nF for 50 m s). The de-emphasis is effective for both AF outputs during FM operation, but deactivated for AM operation. A frequency converter is inserted to mix the different possible sound frequency standards (4.5, 6.0, 6.5 MHz) into a uniform intermediate audio frequency, e.g. 5.5 MHz. The VCO frequency (pin 10) can be controlled from the unlevelled AF output at pin 9 or the de-emphasis connection at pin 14. The intercarrier and converter circuits as well as the FM demodulator are deactivated during AM modulation. FM muting is also possible if a switching voltage is applied to pin 17. All switching functions (standard, SCART, mute) can take place with TTL-equivalent level. 2 (10) w w w a D . S a t e e h U 4 t m o .c Rev. A1: 23.02.1995 www.DataSheet4U.com TELEFUNKEN Semiconductors TDA4481-D Absolute Maximum Ratings Reference point Pin 11, unless otherwise specified Parameters Pin 16 Pin 16 Pin 3,6 Pin 1,2,4,5,7,8,9,12, 13,14,15,16,17,18,19, Symbol VS I S Supply voltage Supply current External voltages Vext Vext Ptot Tj Tamb Tstg Value 10 ... 13.5 80 V5 6 1 125 –25 to + 70 –25 to +125 Unit V mA V V W °C °C °C Power dissipation (in soldered position) Junction temperature Ambient temperature range Storage temperature range Thermal Resistance Parameters Junction ambient Symbol RthJA Value 60 Unit K/W Electrical Characteristics VS = 12 V, Tamb = 25°C, reference point Pin 20 (11), unless otherwise specified Parameters Test Conditions / Pins Supply voltage range Pin 16 Supply current FM-operation Pin 16 AM-operation Pin 16 Input DC voltage Pin 5 Output DC voltage Pin 7,9 Standard switching voltage, Pin 6 Standard B/G Standard L converter operation Standard switching current V6 ≤ 5 V AGC range AM-operation Min. sound carrier input (AF-output voltage voltage Pin 7, 9 –3 dB) Pin 18–19 Audio output voltage m = 54 % Pin 7, 9 Harmonic distortion f = 32.4 MHz, Pin 7, 9 f mod = 1 kHz m = 30 % m = 80 % Symbol V S Min. 10 65 55 Typ. Max. 13.5 Unit V mA I S V o V o 4.4 3.7 1.9 0 3.5 2.3 2.7 1.5 V S V V V I 65 v v THD 50 500 20 mA dB mV w w w a D . Rev. A1: 23.02.1995 S a t e e h U 4 t m o .c mV 0.3 1.0 1.0 2.5 % 3 (10) www.DataSheet4U.com TDA4481-D Parameters FM-operation Min. sound carrier input voltage Picture carrier input voltage Audio output voltage Test Conditions / Pins (intercarrier voltage –3 dB) Pin 18, 19 Pin 1–2 fPC = 38.9 MHz, Pin 7, 9 v1–2 = 20 mV, fSC =33.4 MHz, v18–19 = 10 mV, FM-deviation = 27 kHz, fmod = 1 kHz, QB = 22 fmod = 1 kHz, Pin 7, 9 QB = 22 FM-deviation = .


TW11N TDA4481-D GF063


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)