LAN Transceiver
www.DataSheet4U.com
M59330P
LAN Transceiver
REJ03F0032-0100Z Rev.1.0 Sep.16.2003
Description
The M59330P is an integra...
Description
www.DataSheet4U.com
M59330P
LAN Transceiver
REJ03F0032-0100Z Rev.1.0 Sep.16.2003
Description
The M59330P is an integrated circuit for two-line LAN transceivers, conforming to J1850 specifications. The chip incorporates bus line anomaly detection functions; anomalous behavior causes the ERR signal to go to "L". A selector causes a normal bus signal to be output to RX. By setting the standby signal to "L", a low consumption current state is maintained. At this time, the drivers BUS (+) and BUS (–) are both turned off. In standby mode, on input of "H" level to the ERR pin, error output reset occurs.
Features
Conforms to SAE J1850 specifications Internal bus line anomaly detection function
Applications
LAN transceiver for automotive use, generic LAN transceiver, transceiver for other communication applications
Block Diagram
w
w
w
a D .
S a t
e e h
U 4 t
m o .c
Rev.1.0, Sep.16.2003, page 1 of 10
www.DataSheet4U.com
M59330P
Pin Configuration (Top View)
Explanation of Functions
Pin Deiscription
Pin no. 1 2 3 Pin name Tx STB ERR I/O I I I/O Function Data signal input pin Standby signal input pin; L: standby mode, H: normal operation Error signal output pin and error reset input pin; on detection of anomaly in transmission channel, outputs "L" level; in standby mode, error reset on input of "H" level Pin for output of signal from transmission channel Clamping pin Pin for signal output to transmission channel and for input of signal from transmission channel (ne...
Similar Datasheet