EEE1Axxxxxx

( DataSheet : www.DataSheet4U.com ) Aluminum Electrolytic Capacitors/ S Surface Mount Type Series: S Type : V n Features Endurance: 85°C 2000 h 5.4 mm (<= φ6.3) height, RoHS directive compliant n Specifications Country of Origin Japan Malaysia (φ4, φ5, φ6.3, φ8, φ10) Category temp. range Rated W.V. Range -40 to + 85°C 4 to 100 V .DC Nominal Cap. Range 0.1 to 1500 µ F Capacitance Tolerance ±20 % (120Hz/+20°C) DC Leakage Current I <= 0.01 CV or 3(µ A) (Bi-Polar I<= 0.02 CV or 6 (µA)) after 2 minutes (Whichever is greater) tan δ Please see the attached standard products list Characteristics at Low Temperature W.V. (V) -25 / +20 °C -40 / +20 °C 4 7 15 6.3 4 8 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 63 3 4 100 3 4 (Impedance ratio at 120 Hz) After applying rated working voltage for 2000 hours at +85±2°C and then being stabilized at +20°C, capacitors shall meet the following limits. Endurance Capacitance change : ±20% of initial measured value Size code Rated W.V. Cap. change A(φ3) A(φ3) to D8(φ6.3) <= D(φ6.3)Miniature 4 to 50W.V. 4 W.V. 6.3 W.V. => 10 W.V. ±30% ±20% Initial measured value for1000 hours tan δ <= 200% of initial specified value DC leakage current <= initial specified value Shelf Life After storage for 1000 hours at +85±2°C with no voltage applied and then being stabilized at +20°C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Resistance to Soldering Heat After reflow soldering and then being ...