MC33206

( DataSheet : www.DataSheet4U.com ) Order this document by MC33206/D MC33206 MC33207 Rail-To-Rail Operational Amplifiers with Enable Feature The MC33206/7 family of operational amplifiers provide rail–to–rail operation on both the input and output. The inputs can be driven as high as 200 mV beyond the supply rails without phase reversal on the outputs and the output can swing within 50 mV of each rail. This rail–to–rail operation enables the user to make full use of the supply voltage range available. It is designed to work at very low supply voltages (±0.9 V) yet can operate with a single supply of up to 12 V and ground. Output current boosting techniques provide a high output current capability while keeping the drain current of the amplifier to a minimum. The MC33206/7 has an enable mode that can be controlled externally. The typical supply current in the standby mode is <1.0 µA (VEnable = Gnd). The addition of an enable function makes this amplifier an ideal choice for power sensitive applications, battery powered equipment (instrumentation and monitoring), portable telecommunication, and sample–and–hold applications. LOW VOLTAGE RAIL–TO–RAIL OPERATIONAL AMPLIFIERS SEMICONDUCTOR TECHNICAL DATA MC33206 P SUFFIX PLASTIC PACKAGE CASE 646 14 1 14 Standby Mode (ID ≤1.0 µA, Typ) Low Voltage, Single Supply Operation (1.8 V and Ground to 12 V and Ground) Rail–to–Rail Input Common Mode Voltage Range Output Voltage Swings within 50 mV of both Rails No Phase...