DatasheetsPDF.com

MC33207 Dataheets PDF



Part Number MC33207
Manufacturers Motorola
Logo Motorola
Description (MC33206 / MC33207) LOW VOLTAGE RAIL-TO-RAIL OPERATIONAL AMPLIFIERS
Datasheet MC33207 DatasheetMC33207 Datasheet (PDF)

( DataSheet : www.DataSheet4U.com ) Order this document by MC33206/D MC33206 MC33207 Rail-To-Rail Operational Amplifiers with Enable Feature The MC33206/7 family of operational amplifiers provide rail–to–rail operation on both the input and output. The inputs can be driven as high as 200 mV beyond the supply rails without phase reversal on the outputs and the output can swing within 50 mV of each rail. This rail–to–rail operation enables the user to make full use of the supply voltage range av.

  MC33207   MC33207



Document
( DataSheet : www.DataSheet4U.com ) Order this document by MC33206/D MC33206 MC33207 Rail-To-Rail Operational Amplifiers with Enable Feature The MC33206/7 family of operational amplifiers provide rail–to–rail operation on both the input and output. The inputs can be driven as high as 200 mV beyond the supply rails without phase reversal on the outputs and the output can swing within 50 mV of each rail. This rail–to–rail operation enables the user to make full use of the supply voltage range available. It is designed to work at very low supply voltages (±0.9 V) yet can operate with a single supply of up to 12 V and ground. Output current boosting techniques provide a high output current capability while keeping the drain current of the amplifier to a minimum. The MC33206/7 has an enable mode that can be controlled externally. The typical supply current in the standby mode is <1.0 µA (VEnable = Gnd). The addition of an enable function makes this amplifier an ideal choice for power sensitive applications, battery powered equipment (instrumentation and monitoring), portable telecommunication, and sample–and–hold applications. LOW VOLTAGE RAIL–TO–RAIL OPERATIONAL AMPLIFIERS SEMICONDUCTOR TECHNICAL DATA MC33206 P SUFFIX PLASTIC PACKAGE CASE 646 14 1 • • • • • • • • • 14 Standby Mode (ID ≤1.0 µA, Typ) Low Voltage, Single Supply Operation (1.8 V and Ground to 12 V and Ground) Rail–to–Rail Input Common Mode Voltage Range Output Voltage Swings within 50 mV of both Rails No Phase Reversal on the Output for Over–Driven Input Signals High Output Current (ISC = 80 mA, Typ) Low Supply Current (ID = 0.9 mA, Typ) 600 Ω Output Drive Capability Typical Gain Bandwidth Product = 2.2 MHz 1 D SUFFIX PLASTIC PACKAGE CASE 751A (SO–14) 14 N.C. 13 VCC 12 Output 2 1 N.C. 1 N.C. 2 Output 1 3 4 Inputs 1 5 2 11 10 9 8 Inputs 2 Enable 2 N.C. Enable 1 6 VEE 7 (Dual, Top View) MC33207 P SUFFIX PLASTIC PACKAGE CASE 648 1 16 16 1 D SUFFIX PLASTIC PACKAGE CASE 751B (SO–16) 16 Enable 1, 4 15 Output 4 1 4 Output 1 1 2 Inputs 1 ORDERING INFORMATION Operational Amplifier Function Dual MC33206P MC33207D Quad MC33207P Plastic DIP TA= –40 40 ° to +105 105°C Plastic DIP SO–16 Device MC33206D Operating Temperature Range Package 3 14 13 Inputs 4 VCC 4 5 Inputs 2 6 2 3 12 VEE 11 10 9 Inputs 3 Output 3 SO–14 Output 2 7 Enable 2, 3 8 (Quad, Top View) © Motorola, Inc. 1999 Rev 1 MOTOROLA ANALOG IC DEVICE DATA 1 www.DataSheet4U.com MC33206 MC33207 MAXIMUM RATINGS Rating Supply Voltage (VCC to VEE) ESD Protection Voltage at any Pin Human Body Model Voltage at any Device Pin Input Differential Voltage Range Common Mode Input Voltage Range (Note 2) Output Short Circuit Duration (Note 3) Maximum Junction Temperature Storage Temperature Range Maximum Power Dissipation Symbol VS VESD VDP VIDR VCM ts TJ Tstg PD Value 13 2,000 VS ± 0.5 (Note 1) VCC + 0.5 to VEE – 0.5 (Note 3) +150 –65 to +150 (Note 3) Unit V V V V V sec °C °C mW NOTES: 1. The differential input voltage of each amplifier is limited by two internal parallel back–to–back diodes. For additional differential input voltage range, use current limiting resistors in series with the input pins. 2. The common–mode input voltage range of each amplifier is limited by diodes connected from the inputs to both power supply rails. Therefore, the voltage on either input must not exceed either supply rail by more than 500 mV. 3. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded. 4. ESD data available upon request. DC ELECTRICAL CHARACTERISTICS (VCC = 5.0 V, VEE = 0 V, VEnable = 5.0 V, TA = 25°C, unless otherwise noted.) Characteristic Input Offset Voltage (VCM 0 to 0.5 V, VCM 1.0 to 5.0 V) MC33206: TA = 25°C MC33201: TA = –40° to +105°C MC33207: TA = 25°C MC33202: TA = –40° to +105°C Input Offset Voltage Temperature Coefficient (RS = 50 Ω) TA = –40° to +105°C Input Bias Current (VCM = 0 to 0.5 V, VCM = 1.0 to 5.0 V) TA = 25°C TA = –40° to +105°C Input Offset Current (VCM = 0 to 0.5 V, VCM = 1.0 to 5.0 V) TA = 25°C TA = –40° to +105°C Common Mode Input Voltage Range Large Signal Voltage Gain (VCC = 5.0 V, VEE = –5.0 V) RL = 10 kΩ RL = 600 Ω Output Voltage Swing (VID = ±0.2 V) RL = 10 kΩ RL = 10 kΩ RL = 600 Ω RL = 600 Ω Common Mode Rejection (Vin = 0 to 5.0 V) Power Supply Rejection Ratio VCC/VEE = 5.0 V/Gnd to 3.0 V/Gnd Output Short Circuit Current (Source and Sink) Figure – Symbol VIO – – – – – ∆VIO/∆T IIB – – – IIO – – – – VICR AVOL 50 25 – VOH VOL VOH VOL – – – CMR PSRR PSR ISC 4.85 – 4.75 – 60 – 66 50 4.95 0.05 4.85 0.15 90 25 92 80 – 0.15 – 0.25 – 500 – – dB µV/V dB mA 300 250 – – V – VEE 5.0 10 VCC + 0.2 VEE – 0.2 50 100 VCC – V kV/V 80 100 200 250 nA – 0.5 1.0 0.5 1.0 2.0 8.0 11 10 13 – µV/°C nA Min Typ Max Unit mV – 2 MOTOROLA ANALOG IC DEVICE DATA MC33206 MC33207 DC ELECTRICAL CHARACTERISTICS (continued) (VCC = 5.0 V, VEE = 0 V, VEnable = 5.0 V, TA = 25°C, unless otherwise noted.) Characteristic Power Supply Current (VO = 2.5.


MC33204 MC33207 MC33204


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)