DatasheetsPDF.com

LPC2136 Dataheets PDF



Part Number LPC2136
Manufacturers NXP
Logo NXP
Description Single-chip 16/32-bit microcontrollers
Datasheet LPC2136 DatasheetLPC2136 Datasheet (PDF)

( DataSheet : www.DataSheet4U.com ) LPC2131/2132/2134/2136/2138 Single-chip 16/32-bit microcontrollers; 32/64/128/256/512 kB ISP/IAP Flash with 10-bit ADC and DAC Rev. 02 — 15 April 2005 Preliminary data sheet 1. General description The LPC2131/2132/2134/2136/2138 microcontrollers are based on a 32/16 bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, that combines the microcontroller with 32 kB, 64 kB, 128 kB, 256 kB and 512 kB of embedded high speed Flash memory. A 128-b.

  LPC2136   LPC2136



Document
( DataSheet : www.DataSheet4U.com ) LPC2131/2132/2134/2136/2138 Single-chip 16/32-bit microcontrollers; 32/64/128/256/512 kB ISP/IAP Flash with 10-bit ADC and DAC Rev. 02 — 15 April 2005 Preliminary data sheet 1. General description The LPC2131/2132/2134/2136/2138 microcontrollers are based on a 32/16 bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, that combines the microcontroller with 32 kB, 64 kB, 128 kB, 256 kB and 512 kB of embedded high speed Flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. Due to their tiny size and low power consumption, these microcontrollers are ideal for applications where miniaturization is a key requirement, such as access control and point-of-sale. With a wide range of serial communications interfaces and on-chip SRAM options of 8/16/32 kB, they are very well suited for communication gateways and protocol converters, soft modems, voice recognition and low end imaging, providing both large buffer size and high processing power. Various 32-bit timers, single or dual 10-bit 8 channel ADC(s), 10-bit DAC, PWM channels and 47 GPIO lines with up to nine edge or level sensitive external interrupt pins make these microcontrollers particularly suitable for industrial control and medical systems. 2. Features 2.1 Key features s 16/32-bit ARM7TDMI-S microcontroller in a tiny LQFP64 package. s 8/16/32 kB of on-chip static RAM and 32/64/128/256/512 kB of on-chip Flash program memory. 128 bit wide interface/accelerator enables high speed 60 MHz operation. s In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single Flash sector or full chip erase in 400 ms and programming of 256 bytes in 1 ms. s EmbeddedICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor software and high speed tracing of instruction execution. s One (LPC2131/32) or two (LPC2134/36/38) 8 channel 10-bit A/D converters provides a total of up to 16 analog inputs, with conversion times as low as 2.44 µs per channel. s Single 10-bit D/A converter provides variable analog output (LPC2132/34/36/38). s Two 32-bit timers/external event counters (with four capture and four compare channels each), PWM unit (six outputs) and watchdog. s Low power Real-time clock with independent power and dedicated 32 kHz clock input. s Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with buffering and variable data length capabilities. s Vectored interrupt controller with configurable priorities and vector addresses. www.DataSheet4U.com www.DataSheet4U.com Philips Semiconductors LPC2131/2132/2134/2136/2138 Single-chip 16/32-bit microcontrollers s Up to 47 5 V tolerant general purpose I/O pins in tiny LQFP64 package. s Up to nine edge or level sensitive external interrupt pins available. s 60 MHz maximum CPU clock available from programmable on-chip PLL with settling time of 100 µs. s On-chip integrated oscillator operates with external crystal in range of 1 MHz to 30 MHz and with external oscillator up to 50 MHz. s Power saving modes include Idle and Power-down. s Individual enable/disable of peripheral functions as well as peripheral clock scaling down for additional power optimization. s Processor wake-up from Power-down mode via external interrupt or BOD. s Single power supply chip with POR and BOD circuits: x CPU operating voltage range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O pads. 3. Ordering information Table 1: Ordering information Package Name LPC2131FBD64 LPC2132FBD64 LPC2134FBD64 LPC2136FBD64 LPC2138FBD64 LQFP64 LQFP64 LQFP64 LQFP64 LQFP64 Description plastic low profile quad flat package; 64 leads; body 10 × 10 × 1.4 mm plastic low profile quad flat package; 64 leads; body 10 × 10 × 1.4 mm plastic low profile quad flat package; 64 leads; body 10 × 10 × 1.4 mm plastic low profile quad flat package; 64 leads; body 10 × 10 × 1.4 mm plastic low profile quad flat package; 64 leads; body 10 × 10 × 1.4 mm Version SOT314-2 SOT314-2 SOT314-2 SOT314-2 SOT314-2 Type number 3.1 Ordering options Table 2: Ordering options Flash memory RAM 32 kB 64 kB 128 kB 256 kB 512 kB 8 kB 16 kB 16 kB 32 kB 32 kB ADC 1 1 2 2 2 DAC 1 1 1 1 Temperature range (°C) −40 to +85 −40 to +85 −40 to +85 −40 to +85 −40 to +85 Type number LPC2131FBD64 LPC2132FBD64 LPC2134FBD64 LPC2136FBD64 LPC2138FBD64 9397 750 14868 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Preliminary data sheet Rev. 02 — 15 April 2005 2 of 41 Philips Semiconductors LPC2131/2132/2134/2136/2138 Single-chip 16/32-bit microcontrollers 4. Block diagram TMS(3) TDI(3) TRST(3) TCK(3) TDO(3) XTAL2 RST XTAL1 LPC2131/2132/2134/2136/2138 TEST/DEBUG INTERFACE EMULATION TRACE MODULE PLL system clock SYSTEM FUNCTION.


LPC2134 LPC2136 LPC2138


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)