SMD200

Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 800-227-4856 FAX 800-227-4866 R PolySwitch® PTC Devices Overcurrent Protection Device PRODUCT: SMD200 DOCUMENT: SCD 22294 PCN: 925851 REV LETTER: H REV DATE: JULY 11, 1998 PAGE NO.: 1 OF 2 Specification Status: Released Maximum Electrical Ratings Operating Voltage / Interrupt Current C 15V / 40A 12V / 60A 5V / 125A H Marking: B G D A E F 200 Manufacturer’s Mark Part Identification Notes: 1. All metal surfaces are tin plated. 2. Devices cannot be wave soldered. 3. Drawing not to scale. TABLE I. DIMENSIONS: A B C D E F G H MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN mm: 8.00 9.40 -3.00 5.99 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 in*: (0.315) (0.370) -(0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) *Rounded off approximation TABLE II. PERFORMANCE RATINGS: I HOLD CURRENT RATINGS REFERENCE ONE-HOUR TRIPPED-STATE RESISTANCE POST SOLDER POWER VALUES RESISTANCE DISSIPATION (PRE REFLOW) (260°C, 20 SEC) AMPS SECONDS AT OHMS OHMS WATTS AT AT 60°C 20°C, 8.0A AT 20°C AT 20°C 20°C HOLD TRIP MAX MIN MAX MAX MAX 1.3 2.8 12 0.050 0.070 0.125 1.9 TIME TO TRIP AMPS 20°C HOLD 2.0 AMPS AT 0°C HOLD TRIP 2.3 4.6 AMPS AT 20°C HOLD TRIP 2.0 4.0 Reference Documents: Precedence: Effectivity: CAUTION: PS300, E.N. SMD 1.0x This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date o...