PolySwitch PTC Devices / Circuit Protection Devices
Tyco / Electronics Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 Fax: ...
Description
Tyco / Electronics Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 Fax: 800-227-4866
PolySwitch® PTC Devices
Overcurrent Protection Device
PRODUCT: nanoSMDM016
DOCUMENT: SCD 24833 PCN: 638024 REV LETTER: A REV DATE: AUGUST 10, 2001 PAGE NO.: 1 OF 1
Specification Status: RELEASED
Maximum Electrical Rating
Voltage: 30V DC MAX Current: 10A MAX
Notes: 1. All terminations are gold plated.
Partial coverage of plating with solder may occur without effect on solderability or electrical performance
2. Devices cannot be wave soldered. 3. Drawing not to scale
Marking:
Manufacturer's Mark
016
Part Identification
TABLE I. DIMENSIONS:
A B C D MIN MAX MIN MAX MIN MAX MIN MAX mm: 3.0 3.4 0.8 1.2 1.4 1.8 0.75 1.05 in:* (0.118) (0.134) (0.032) (0.047) (0.055) (0.071) (0.030) (0.041)
*Rounded off approximation
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS** TIME TO TRIP ** SECONDS AT 25°C, 1.0A MAX 0.3 RESISTANCE TRIPPEDVALUES STATE POWER DISSIPATION** OHMS WATTS AT AT 25°C 25°C, 30V MIN MAX* MAX 1.2 4.5 0.5
AMPERES AMPERES AMPERES AT 0°C AT 25°C AT 60°C HOLD TRIP HOLD TRIP HOLD TRIP 0.19 0.44 0.16 0.37 0.10 0.23
*Maximum resistance is measured 1 hour after reflow. ** Values specified were determined using PCB’s with 0.030”X1.5 ounce copper traces.
Reference Documents: Precedence: Effectivity: CAUTION:
PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the ...
Similar Datasheet