DatasheetsPDF.com

TMP88CS38BNG Dataheets PDF



Part Number TMP88CS38BNG
Manufacturers Toshiba
Logo Toshiba
Description (TMP88Cx38xxG) CMOS 8-Bit Microcontroller
Datasheet TMP88CS38BNG DatasheetTMP88CS38BNG Datasheet (PDF)

TMP88CS38B/CM38B/CP38B CMOS 8-Bit Microcontroller TMP88CS38BNG/FG, TMP88CM38BNG/FG, TMP88CP38BNG/FG The TMP88CS38B/CM38B/CP38B is the high speed and high performance 8-bit single chip microcomputers. This MCU contain CPU core, ROM, RAM, input/output ports, four Multi-function timer/counters, serial bus interface, on-screen display, PWM output, 8-bit AD converter, and remote control signal preprocessor on chip. Product No. TMP88CS38BNG/FG TMP88CM38BNG/FG TMP88CP38BNG/FG ROM 64 K × 8 bits 32 K .

  TMP88CS38BNG   TMP88CS38BNG



Document
TMP88CS38B/CM38B/CP38B CMOS 8-Bit Microcontroller TMP88CS38BNG/FG, TMP88CM38BNG/FG, TMP88CP38BNG/FG The TMP88CS38B/CM38B/CP38B is the high speed and high performance 8-bit single chip microcomputers. This MCU contain CPU core, ROM, RAM, input/output ports, four Multi-function timer/counters, serial bus interface, on-screen display, PWM output, 8-bit AD converter, and remote control signal preprocessor on chip. Product No. TMP88CS38BNG/FG TMP88CM38BNG/FG TMP88CP38BNG/FG ROM 64 K × 8 bits 32 K × 8 bits 48 K × 8 bits RAM 2 K × 8 bits 1.5 K × 8 bits Package SDIP42-P-600-1.78 P-QFP44-1414-0.80K OTP MCU TMP88PS38BNG/FG Features ♦ ♦ ♦ 8-bit single chip microcomputer TLCS-870/X series Instruction execution time: 0.25 µs (at 16 MHz) 842 basic instructions • • • • ♦ ♦ Multiplication and division (8 bits × 8 bits, 16 bits × 8 bits, 16 bits/8 bits) Bit manipulations (Set/clear/complement/move/test/exclusive or) 16-bit data and 20-bit data operations 1-byte jump/subroutine call (Short relative jump/vector call) I/O ports: Maximum 33 (High current output: 4) 17 interrupt sources: External 6, internal 11 • • • All sources have independent latches each, and nested interrupt control is available. Edge-selectable external interrupts with noise reject High-speed task switching by register bank changeover ♦ ♦ ROM corrective function Two 16-bit timer/counters: TC1, TC2 • Timer, event counter, pulse width measurement, external trigger timer, window modes 030619EBP1 • The information contained herein is subject to change without notice. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunctionor failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • The products described in this document are subject to the foreign exchange and foreign trade laws. • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. • For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality and Reliability Assurance/Handling Precautions. Purchase of TOSHIBA I2C components conveys a license under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips. 88CS38B-1 2004-8-18 TMP88CS38B/CM38B/CP38B ♦ ♦ ♦ ♦ ♦ Two 8-bit timer/counters: TC3, TC4 • Timer, event counter, capture (Pulse width/duty measurement) mode Time base timer (Interrupt frequency: 0.95 Hz to 31250 Hz) Watchdog timer • • • • • • • • • ♦ ♦ ♦ Interrupt sourse/reset output I2C bus, 8-bit SIO mode (Selectable two I/O channels) Font ROM characters: 384 characters Characters display: 32 columns × 12 lines Composition: 16 × 18 dots Size of character: 3 kinds (Line by line) Color of character: 8 or 15 kinds (Character by character) Variable display position: Horizontal 256 steps, Vertical 512 steps Fringing, smoothing, slant, underline, blinking function Serial bus interface On-screen display circuit Jitter elim.


TMP88PS76F TMP88CS38BNG TMP88CS38BFG


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)