(W97xxxx-x) Class 97 Power Relay
METAL ENCLOSED, 25 AMP - 2 FORM "Z" CONTACTS
CLASS 97 POWER RELAY
PLUG-IN OR SIDE STUD MOUNT
OUTLINE DIMENSIONS Dimensio...
Description
METAL ENCLOSED, 25 AMP - 2 FORM "Z" CONTACTS
CLASS 97 POWER RELAY
PLUG-IN OR SIDE STUD MOUNT
OUTLINE DIMENSIONS Dimensions shown in Inch & (Millimeter)
CLASS
97
STUD MOUNT
1.60 (40.6) 1.52 (38.6) 0.40 (10.1) 8-32 Stud
3 Standoffs on Stud Mount Covers only. (Typical)
1.52 (38.6)
PLUG-IN, PLAIN COVER, NO STUD
1.52 (38.6)
2.06 Max. (52.3) 1.21 (30.7)
.310 (7.8) 1.56 (39.7)
3 4 5 6
.250 x .030 Q.C. Terminal (Typical)
WIRING SCHEMATIC Viewed from Terminal End
3
4
5
6
1.56 (39.7)
1 7 8 2 9 10
1
2
7
8
9
10
COIL Pull-in Voltage: Dropout Voltage: Max. allowed voltage: Maximum Power Minimum Power: Duty Resistance
SPECIFICATIONS
AC, 85% of Nominal Voltage or less DC, 75% of Nominal Voltage or less 110% of nominal voltage 3 Watts 1.6 Watts Continuous ±10% 2 Form "Z" (DPDT DB-DM) Silver Alloy 50 Milliohms max. (Initial)
CONTACTS Contact Configuration: Contact Material: Contact Resistance: Contact Rating:
TIMING Operate Time: Release Time:
w
DIELECTRIC STRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contact to Frame: Insulation Resistance: TEMPERATURE Operating:
w
.D w
t a
S a
e h
t e
1.56 (39.7)
U 4
1.56 (39.7)
7 8 1 2 9 10
.c
3 4 5 6
m o
.110 x .010 Q.C. Coil Terminal (Typical)
25 Amps @ 120 VAC Resistive. 1 HP @ 120 VAC, 2Hp @ 277 VAC 10 Amps @ 240 VAC Resistive. 1KW Tungsten Lamp Load @ 120 VAC. 25 Amps Resistive @ 24 VDC. 35 mS Max. @ Nominal Voltage. 35mS Max. @ Nominal Voltage. 2000 V rms 1500 V rms 2000 V rms 2000 V rms 500 VDC Ex...
Similar Datasheet