LM6182 Dual 100 mA Output, 100 MHz Current Feedback Amplifier
April 1994
LM6182 Dual 100 mA Output, 100 MHz Current Fe...
LM6182 Dual 100 mA Output, 100 MHz Current Feedback Amplifier
April 1994
LM6182 Dual 100 mA Output, 100 MHz Current Feedback Amplifier
General Description
The LM6182 dual current feedback amplifier offers an unparalleled combination of bandwidth, slew-rate, and output current. Each amplifier can directly drive a 2V signal into a 50Ω or 75Ω back-terminated coax cable system over the full industrial temperature range. This represents a radical enhancement in output drive capability for a dual 8-pin high-speed amplifier making it ideal for video applications. Built on National’s advanced high-speed VIP II™ (Vertically Integrated
PNP) process, the LM6182 employs current-feedback providing bandwidth that does not vary dramatically with gain; 100 MHz at Av = −1, 60 MHz at Av = −10. With a slew rate of 2000 V/µsec, 2nd harmonic distortion of −50 dBc at 10 MHz and settling time of 50 ns (0.1%), the two independent amplifiers of the LM6182 offer performance that is ideal for data acquisition, high-speed ATE, and precision pulse amplifier applications. See the LM6181 data sheet for a single amplifier with these same features.
Features
(Typical unless otherwise noted) n Slew Rate: 2000 V/µs n Closed Loop Bandwidth: 100 MHz n Settling Time (0.1%): 50 ns n Low Differential Gain and Phase Error: 0.05%, 0.04˚ RL = 150Ω n Low Offset Voltage: 2 mV n High Output Drive: ± 10V into 150Ω n Characterized for Supply Ranges: ± 5V and ± 15V n Improved Performance over OP260 and LT1229
Application...