PDU50WX1

INTERFACE SPECIFICATION INSIDE Technology Document no. D00390-A Display type: Cable no.: System: Status: Pioneer PDU-50WX1 for LVDSTX-2A-I Date: 2001-10-26 Page 1 of 6 Rev.: A Pioneer PDU-50WX1 not available LVDSTX-2A-I on 786LCD/S -/MG -/3.5 and GX1 Verified (not verified on GX1) Settings: Display driver: Pioneer PDU-50WX1, 3.3V LVDSTX-2A-I settings: JP1 - JP5 not used, SW1(1,2,3,4,5,6)= (off,off,off,off,on,off) (LVDSTX-2A-X (not available yet) settings: JP1 - JP5 not used, SW1(1,2,3,4,5,6)= (off,off,off,off,on,on)) Notes: Use SIS VGA driver version 2.02 or higher and Display block 3.03 Plasma. If 256 colors are selected then CRT Monitor and LCD can both be on. If 65536 colors are selected then CRT Monitor and LCD can not both be on. 65536 colors are only possible if Embedded Share Memory = 8MB or more. If True color is selected then CRT Monitor and LCD can not both be on. True colors is only possible if Embedded Share Memory = 8MB or more and FSB/DRAM speed is 133/133. LVDSTX-2-I J2 J1 Cable no 1 Plasma Display w w w .D 100pole J3 t a J2 S a Cable adapt e h t e U 4 26P J1 .c 26P J2 m o National LVDS Receiver Cable no 2 VCC GND J3 J2 CN4301 Cable no. 3 J1 J4 CN3403 J4 w w w .D at h S a t e e 4U . m o c INTERFACE SPECIFICATION INSIDE Technology Document no. D00390-A Pioneer PDU-50WX1 for LVDSTX-2A-I Date: 2001-10-26 Cable no. 1 Twister/Pair 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 Page 2 of 6 Rev.: A Conn. ...