planar640480ad4

INTERFACE SPECIFICATION INSIDE Technology Document no. D00024-0 Display type: Cable no.: System: Display driver: Status: w w a D . w S a t e e h PLANAR EL640.480 AD4 40860006 (inclusive QND Quad NAND Gate type 74F132 or 74HC132) 486-586LCD with FPUM-1 and AC-1 PLA 640.480 A4b verified U 4 t m o .c PLANAR EL640.480 AD4 Date: 1996-09-20 Page 1 of 1 Rev.: 0 Display J1 32-pole conn. Cable JPLCD connector Remarks Pin no. Function Wire no. Pin Function 1 GND 1 6 GND also GND to QND-7 (Black wire) 2 D0 2 27 P8 (LSB) 3 GND 3 9 GND 4 D1 4 28 P9 5 GND 5 12 GND 6 D2 6 30 P10 7 Not used 7 8 D3 8 31 P11 9 Not used 9 10 D4 10 33 P12 not used if DCON = “1-d” 11 Not used 11 12 D5 12 34 P13 not used if DCON = “1-d” 13 Not used 13 14 D6 14 36 P14 not used if DCON = “1-d” 15 GND 15 14 GND 16 D7 16 37 P15 (MSB) not used if DCON = “1-d” 17 GND 17 17 GND 18 VCLK 18 - connect to QND-3 output (Orange wire) 13 SHFCLK connect to QND,1+2 input (Brown wire) 19 GND 19 20 GND 20 Blanking 20 - Normal mode 21 GND 21 23 GND 22 HS 22 7 M 23 Not used 23 24 VS 24 11 FLM 25 Not used 25 26 SELFTST 26 26 GND 27 COLMAP 27 - Use the DEFMAP jumpers 28 ENABLE 28 4 ENVCC 29 Reserved 29 30 _LOWPOW 30 4 ENVCC Maximum brightness and contrast 31 Not used 31 32 Not used 32 33 Reserved 33 - No connection 34 Reserved 34 - No connection w w .D w t a S a e h t e U 4 .c m o Display J2 4-pole conn. Pin no. Function 1 Vcc2 2 GND 3 GND 4 Vcc1 Cable Wire no. 41 & 42 39 & 40 37 & 38 35 & 36 Connector pin conne...