AC03FGM

DATA SHEET THYRISTORS AC03DGM, AC03FGM 3 A MOLD TRIAC The AC03EGM and AC03FGM are fully diffused mold TRIACs with an effective on-current of 3 A. The repeat peak off-voltages are 400 V and 600 V. PACKAGE DRAWING (UNIT: mm) FEATURES Gate trigger current (mode I, III, and IV) at 12 mA or less is guaranteed. This transistor features a small and lightweight package and is easy to handle even on the mounting surface due to its TO202AA dimensions. Processing of lead wires and heatsink (tablet) using jigs is also possible. High degrees-of-freedom applications design is available due to high gate trigger sensitivity and small hold current distribution. Employs flame-retardant epoxy resin (UL94V-0). APPLICATIONS Noncontact switches of motor speed control, heater temperature control, lamp light control *TC test bench-mark Standard weight: 1.4 g ABSOLUTE MAXIMUM RATINGS (Ta = 25°C) Parameter Non-repetitive peak off-state voltage Repetitive peak off-voltage Effective on-state current Surge on-state current Fusing current Critical rate of rise of on-state current Peak gate power dissipation Average gate power dissipation Peak gate current Junction temperature Storage temperature Symbol VDSM VDRM IT(RMS) ITSM ƒiT2dt dIT/dt PGM PG(AV) IGM Tj Tstg AC03DGM 500 400 3 (TC = 92°C) 30 (50 Hz 1 cycle) 33 (60 Hz 1 cycle) 4.0 (1 ms ≤ t ≤ 10 ms) 40 3 (f ≥ 50 Hz, Duty ≤ 10 %) 0.3 ±0.5 (f ≥ 50 Hz, Duty ≤ 10 %) −40 to +125 −55 to +150 A2S A/µs W W A °C °C − − − − − − − AC03FGM 700 600 Uni...