LM6132

LM6132 Dual and LM6134 Quad, Low Power 10 MHz Rail-to-Rail I/O Operational Amplifiers April 2000 LM6132 Dual/LM6134 Quad Low Power 10 MHz Rail-to-Rail I/O Operational Amplifiers General Description The LM6132/34 provides new levels of speed vs power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 360 µA/amp supply current, the 10 MHz gain-bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life. The LM6132/34 can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. The LM6132/34 can also drive large capacitive loads without oscillating. Operating on supplies from 2.7V to over 24V, the LM6132/34 is excellent for a very wide range of applications, from battery operated systems with large bandwidth requirements to high speed instrumentation. Features (For 5V Supply, Typ Unless Noted) n Rail-to-Rail input CMVR −0.25V to 5.25V n Rail-to-Rail output swing 0.01V to 4.99V n High gain-bandwidth, 10 MHz at 20 kHz n Slew rate 12 V/µs n Low supply current 360 µA/Amp n Wide supply range 2.7V to over 24V n CMRR 100 dB n Gain 100 dB with RL = 10k n PSRR 82 dB Applications n n n n n Battery operated instrumen...