Operational Amplifier and Adjustable Reference
LM611 Operational Amplifier and Adjustable Reference
May 1998
LM611 Operational Amplifier and Adjustable Reference
Gen...
Description
LM611 Operational Amplifier and Adjustable Reference
May 1998
LM611 Operational Amplifier and Adjustable Reference
General Description
The LM611 consists of a single-supply op-amp and a programmable voltage reference in one space saving 8-pin package. The op-amp out-performs most single-supply op-amps by providing higher speed and bandwidth along with low supply current. This device was specifically designed to lower cost and board space requirements in transducer, test, measurement and data acquisition systems. Combining a stable voltage reference with a wide output swing op-amp makes the LM611 ideal for single supply transducers, signal conditioning and bridge driving where large common-mode signals are common. The voltage reference consists of a reliable band-gap design that maintains low dynamic output impedance (1Ω typical), excellent initial tolerance (0.6%), and the ability to be programmed from 1.2V to 6.3V via two external resistors. The voltage reference is very stable even when driving large capacitive loads, as are commonly encountered in CMOS data acquisition systems. As a member of National’s Super-Block™ family, the LM611 is a space-saving monolithic alternative to a multi-chip solution, offering a high level of integration without sacrificing performance.
Features
OP AMP n Low operating current: 300 µA (op amp) n Wide supply voltage range: 4V to 36V n Wide common-mode range: V− to (V+−1.8V) n Wide differential input voltage: ± 36V n Available in low cost 8-...
Similar Datasheet