METHOD OF REPLACING THE LAMP UNIT
Please pay attention to the following items while replacing the Lamp Unit.
a. Please do not damage the LCD Panel Surface, and do not touch it with bare hands.
(Wearing gloves is recommended.)
b. Please be careful with electrostatics, and work in clean environment to prevent entering dust
and/or foreign matters that will cause bad display image.
(Using clean bench or similar environment is recommended.)
c. Please be careful of the edge of the frame metal.
(2) Method of replacing the Lamp Unit
1) Put the TFT-LCD Module on the table.(LCD Panel Surface is upside.)
Please check the LCD Panel
Surface for scratch, dust, and
2) Turn the TFT-LCD Module upside down and unfasten the cable.
Please unfasten the wire
from the latch of plastic
T-51638D084J-FW-A-AB (AB) No. 2003-0193