T-51513D104J-FW_A_AD

m o .c Technical Specification LCD Module U 4 t e e h T-51513D104J-FW-A-AD S a at .D w w w Type No. First Edition Jul 7, 2003 Final Revision ****** Approved by (Quality Assurance Division) m o .c U 4 t e e h S a t a .D w w w No. -1 2 3 4 5 6 7 8 9 Item Page 1 2 3 3 6 7 CONTENTS OVERVIEW ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS INTERFACE PIN CONNECTION INTERFACE TIMING BLOCK DIAGRAM 10 11 14 16 17 18 21 MECHANICAL SPECIFICATION OPTICAL CHARACTERISTICS RELIABILITY TEST CONDITION INSPECTION STANDARDS 10 11 ---HANDLING PRECAUTIONS FOR TFT-LCD MODULE PACKAGING SPECIFICATION Checked by (ACI Engineering Division) Prepared by (Module Administration Group) T-51513D104J-FW-A-AD (AD) No. 2003-0110 m o PRODUCTS NUMBER LABELING FORMS 24 .c U LAMP UNIT FOR 10.4” VGA 26 4 t e e h S a at .D w w w OPTREX CORPORATION Page 1/31 1. OVERVIEW T-51513D104J-FW-A-AD is 10.4” color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit, and backlight unit. By applying 6 bit digital data 640 × 480, 260K-color images are displayed on the 10.4” diagonal screen. Input power voltage is single 3.3 / 5.0V for LCD driving. Both 3.3V-CMOS and 5.0V-CMOS level voltage are acceptable for logic input voltage. Inverter for backlight is not included in this module. General specifications are summarized in the following table: ITEM Display Area (mm) Number of Dots Pixel Pitch (mm) Color Pixel Arrangement Display Mode Number of Color Wide Vi...